Fabrication of thermal barrier coatings onto polyimide matrix composites via air plasma spray process
文献类型：期刊论文
| 作者 | Huang WZ ; Fan XZ ; Zhao Y ; Zhou X ; Meng XS ; Wang Y ; Zou BL ; Cao XQ ; Wang Z |
| 刊名 | surface & coatings technology
 |
| 出版日期 | 2012 |
| 卷号 | 207页码:421-429 |
| 关键词 | FUNCTIONALLY GRADED COATINGS THIN-FILMS METALLIC COATINGS COLD SPRAY POLYMER EROSION TEMPERATURE DEPOSITION OXIDATION MICROSTRUCTURE |
| ISSN号 | 0257-8972 |
| 通讯作者 | cao xq |
| 中文摘要 | thermal barrier coatings were fabricated on polyimide matrix composites via air plasma spray process. the phase structures and microstructural evolution of the coatings before and after testing were characterized by powder x-ray diffraction and scanning electron microscopy. during thermal shock test at 400 degrees c, thermal shock lifetime of the coating systems increased with the decrease of thickness of al layer as well as the increase in that of ysz layer. the coating system consisted of 30 mu m al bond layer and 130 mu m ysz top layer exhibited the best thermal shock resistance. meanwhile, owing to the protection of the coating system, the weight loss of the sample decreased from 7.05% to 1.90%, while the corresponding mass ablation rate reduced from 0.48 mg s(-1) to 0.21 mg s(-1). failure mechanism of the coatings was mainly ascribable to the residual stress during deposition, oxidation of substrate and thermal stress induced by mismatch in thermal expansion. crown copyright (c) 2012 published by elsevier b.v. all rights reserved. |
| 收录类别 | SCI收录期刊论文 |
| 语种 | 英语 |
| WOS记录号 | WOS:000309501600059 |
| 公开日期 | 2013-04-23 |
| 源URL | [http://ir.ciac.jl.cn/handle/322003/47990]  |
| 专题 | 长春应用化学研究所_长春应用化学研究所知识产出_期刊论文 |
| 推荐引用方式 GB/T 7714 | Huang WZ,Fan XZ,Zhao Y,et al. Fabrication of thermal barrier coatings onto polyimide matrix composites via air plasma spray process[J]. surface & coatings technology,2012,207:421-429. |
| APA | Huang WZ.,Fan XZ.,Zhao Y.,Zhou X.,Meng XS.,...&Wang Z.(2012).Fabrication of thermal barrier coatings onto polyimide matrix composites via air plasma spray process.surface & coatings technology,207,421-429. |
| MLA | Huang WZ,et al."Fabrication of thermal barrier coatings onto polyimide matrix composites via air plasma spray process".surface & coatings technology 207(2012):421-429. |
入库方式： OAI收割
来源：长春应用化学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。