Fabrication and properties of CaZr(0.9)In(0.1)O(3-delta) prepared by an auto-ignition combustion process
文献类型：期刊论文
| 作者 | Zhang JC(张敬超) ; Wen ZY(温兆银) ; Han JD(韩金铎) ; Liu Y(刘宇) ; Song SF(宋树丰) ; Wen TL(温廷琏) |
| 刊名 | CERAMICS INTERNATIONAL
 |
| 出版日期 | 2011-04-01 |
| 卷号 | 37期号:3页码:943-949 |
| ISSN号 | 0272-8842 |
| 其他题名 | Fabrication and properties of CaZr(0.9)In(0.1)O(3-delta) prepared by an auto-ignition combustion process |
| 通讯作者 | 温兆银 |
| 中文摘要 | One of the major challenges in developing proton conducting CaZr(0.9)In(0.1)O(3-delta) is to achieve a high densification at low sintering temperature. In this work, an auto-ignition combustion process was first used to synthesize CaZr(0.9)In(0.1)O(3-delta) powders aiming to improve its sinterability. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and dilatometry measurement. The results indicate that a calcination temperature of 1000 degrees C is sufficient to form the CaZr(0.9)In(0.1)O(3-delta) phase. The as-obtained powders are fine, homogeneous and well crystallized, which strongly improves the sintering properties. Dense CaZr(0.9)In(0.1)O(3-delta) ceramics with uniform grain size were obtained by sintering at 1350 degrees C, which is much lower than that required for the conventional solid state reaction method. In addition, the electrical properties of CaZr(0.9)In(0.1)O(3-delta) ceramics were studied by electrochemical impedance spectroscopy. |
| 学科主题 | 无机非金属材料 |
| 收录类别 | SCI收录 |
| 原文出处 | http://apps.webofknowledge.com/full_record.do?product=UA&search_mode=GeneralSearch&qid=1&SID=Z1GGCe11G6D53L9@kPA&page=2&doc=11&cacheurlFromRightClick=no |
| 公开日期 | 2012-07-02 |
| 源URL | [http://ir.sic.ac.cn/handle/331005/731]  |
| 专题 | 上海硅酸盐研究所_能量转换材料重点实验室_期刊论文 |
| 推荐引用方式 GB/T 7714 | Zhang JC,Wen ZY,Han JD,et al. Fabrication and properties of CaZr(0.9)In(0.1)O(3-delta) prepared by an auto-ignition combustion process[J]. CERAMICS INTERNATIONAL,2011,37(3):943-949. |
| APA | 张敬超,温兆银,韩金铎,刘宇,宋树丰,&温廷琏.(2011).Fabrication and properties of CaZr(0.9)In(0.1)O(3-delta) prepared by an auto-ignition combustion process.CERAMICS INTERNATIONAL,37(3),943-949. |
| MLA | 张敬超,et al."Fabrication and properties of CaZr(0.9)In(0.1)O(3-delta) prepared by an auto-ignition combustion process".CERAMICS INTERNATIONAL 37.3(2011):943-949. |
入库方式： OAI收割
来源：上海硅酸盐研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。