Microstructure and tribological properties of Ti-Cu intermetallic compound coating
文献类型:期刊论文
作者 | Guo C(郭纯)1,2; Zhou JS(周健松)1![]() ![]() ![]() ![]() ![]() |
刊名 | Materials and Design
![]() |
出版日期 | 2012 |
卷号 | 36页码:482-489 |
关键词 | Intermetallics Coatings Wear |
ISSN号 | 0261-3069 |
通讯作者 | 陈建敏 |
英文摘要 | Ti–Cu intermetallic compound coating has been in situ synthesized successfully on pure Ti substrate by laser cladding using copper powder as the precursor. It has been found that the prepared coating mainly contains of TiCu, TiCu3, Ti3Cu, and Ti phases. The transmission electron microscopy results conform further the existence of Ti–Cu intermetallic compound in the fabricated coating. Tribological properties of the prepared Ti–Cu intermetallic compound coating were systematically evaluated. It was found that normal loads and sliding speeds have a strong influence on the friction coefficient and wear rate of Ti– Cu intermetallic compound coating. Namely, the friction coefficient of the Ti–Cu intermetallic compound coating decreased with increasing normal load and sliding speed. The wear rate of the Ti–Cu intermetallic compound coating decreased rapidly with increasing sliding speed, while the wear rate increased as the normal load increased. |
学科主题 | 材料科学与物理化学 |
收录类别 | SCI |
资助信息 | the Ministry of Science and Technology of China (Project of “863” plan, Grant No. 2006AA03A219);Knowledge Innovation Project in Chinese Academy of Science(YYYJ-0913);National Natural Science Foundation of China (Grant No. 51045004) |
语种 | 英语 |
WOS记录号 | WOS:000301580500066 |
公开日期 | 2013-07-12 |
源URL | [http://210.77.64.217/handle/362003/3407] ![]() |
专题 | 兰州化学物理研究所_固体润滑国家重点实验室 兰州化学物理研究所_先进润滑与防护材料研究发展中心 |
作者单位 | 1.Chinese Acad Sci, Lanzhou Inst Chem Phys, State Key Lab Solid Lubricat, Lanzhou 730000, Peoples R China 2.Chinese Acad Sci, Grad Univ, Beijing 100039, Peoples R China |
推荐引用方式 GB/T 7714 | Guo C,Zhou JS,Yu YJ,et al. Microstructure and tribological properties of Ti-Cu intermetallic compound coating[J]. Materials and Design,2012,36:482-489. |
APA | Guo C,Zhou JS,Yu YJ,Wang LQ,Zhou HD,&Chen JM.(2012).Microstructure and tribological properties of Ti-Cu intermetallic compound coating.Materials and Design,36,482-489. |
MLA | Guo C,et al."Microstructure and tribological properties of Ti-Cu intermetallic compound coating".Materials and Design 36(2012):482-489. |
入库方式: OAI收割
来源:兰州化学物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。