中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
非平衡磁控溅射制备类石墨碳膜及性能研究

文献类型:期刊论文

作者王永军1,2; 李红轩1; 吉利1; 刘晓红1; 吴艳霞1,2; 周惠娣1; 陈建敏1
刊名物理学报
出版日期2012
卷号61期号:5页码:056103(1-7)
关键词磁控溅射 类石墨碳膜 微观结构 性能 magnetron sputtering graphite-like carbon film microstructure performance
ISSN号1000-3290
通讯作者陈建敏
中文摘要利用中频非平衡磁控溅射技术在单晶硅基底上沉积了类石墨碳膜,采用Raman光谱、高分辨透射电子显微镜、原子力显微镜分析了薄膜微观结构和表面形貌;采用纳米压痕仪和CSM摩擦磨损试验机测试了碳膜力学性能。结果表明:利用中频非平衡磁控溅射技术沉积的碳膜是一种以sp2键合碳为主、结构非晶、硬度适中、应力较低、表面粗糙度较大、摩擦性能优异的薄膜。脉冲占空比对薄膜微观结构和性能有显著影响,随着脉冲占空比的增大,Raman光谱D峰和G峰的强度比ID/IG先减小后增大,而硬度随脉冲占空比的增大却呈现出相反的变化趋势,即先增大后减小;大气氛围中的摩擦性能测试表明,本实验制备的薄膜具有优异的抗磨性能(~10-11cm3/N-1﹒m-1)和承载能力(~2.5GPa)。随脉冲占空比的增大,薄膜摩擦系数变化甚微而磨损率却呈现先显著减小后轻微增大的变化趋势。类石墨碳膜优异的摩擦学性能主要归因于其独特的结构、较低的内应力及良好的结构稳定性。
英文摘要A series of graphite-like carbon films is fabricated by the middle frequency magnetron sputtering technique. The microstructures and the morphologies of the resulting films are investigated by Raman spectroscopy, high resolution transmission electron microscopy and atomic force microscopy, respectively. The mechanical and the tribological properties of the films are studied by nanoindentation and CSM tribometer. The results show that the deposited carbon film is dominated by sp2 sites, and has an amorphous structure, a moderate hardness, low internal stress, high surface roughness and superior tribological properties. With the increase of the duty ratio, the intensity ratio between D and G peaks first decreases and then increases, while the film hardness first increases and then decreases. Tribological testing in humid atmosphere demonstrates that the present carbon film has a superior wear resistance (similar to 10(-11) cm3 /N-1 m-1) and high load bearing capacity (similar to 2.5 GPa). Although the duty ratio has no obvious influence on friction coefficient, the wear rate decreases obviously and then increases slightly with the increase of duty ratio. The superior tribological properties of the graphite-like carbon film are attributed mainly to its unique structure, low internal stress and high structure stability.
学科主题材料科学与物理化学
收录类别SCI
资助信息国家自然科学基金(50705093,50575217);国家自然科学基金创新研究群体科学基金(50421502);国家基础研究发展计划(2007CB6074601)
语种中文
CSCD记录号CSCD:4561476
WOS记录号WOS:000303170800048
公开日期2013-07-12
源URL[http://210.77.64.217/handle/362003/3547]  
专题兰州化学物理研究所_固体润滑国家重点实验室
兰州化学物理研究所_先进润滑与防护材料研究发展中心
作者单位1.中国科学院兰州化学物理研究所固体润滑国家重点实验室
2.中国科学院研究生院
推荐引用方式
GB/T 7714
王永军,李红轩,吉利,等. 非平衡磁控溅射制备类石墨碳膜及性能研究[J]. 物理学报,2012,61(5):056103(1-7).
APA 王永军.,李红轩.,吉利.,刘晓红.,吴艳霞.,...&陈建敏.(2012).非平衡磁控溅射制备类石墨碳膜及性能研究.物理学报,61(5),056103(1-7).
MLA 王永军,et al."非平衡磁控溅射制备类石墨碳膜及性能研究".物理学报 61.5(2012):056103(1-7).

入库方式: OAI收割

来源:兰州化学物理研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。