A method combining numerical analysis and limit equilibrium theory to determine potential slip surfaces in soil slopes
文献类型：期刊论文
| 作者 | Xiao Shiguo ; Yan Liping ; Cheng Zhiqiang |
| 刊名 | JOURNAL OF MOUNTAIN SCIENCE
 |
| 出版日期 | 2011-10 |
| 卷号 | 8期号:5页码:718–727 |
| 关键词 | Soil slope Stress field Potential slip surface Slope stability Factor of safety Numerical analysis Limit equilibrium method ANSYS software |
| ISSN号 | 1672-6316 |
| 通讯作者 | Xiao, SG (reprint author), SW Jiaotong Univ, Dept Geol Engn, Chengdu 610031, Peoples R China. |
| 英文摘要 | This paper describes a precise method combining numerical analysis and limit equilibrium theory to determine potential slip surfaces in soil slopes. In this method, the direction of the critical slip surface at any point in a slope is determined using the Coulomb's strength principle and the extremum principle based on the ratio of the shear strength to the shear stress at that point. The ratio, which is considered as an analysis index, can be computed once the stress field of the soil slope is obtained. The critical slip direction at any point in the slope must be the tangential direction of a potential slip surface passing through the point. Therefore, starting from a point on the top of the slope surface or on the horizontal segment outside the slope toe, the increment with a small distance into the slope is used to choose another point and the corresponding slip direction at the point is computed. Connecting all the points used in the computation forms a potential slip surface exiting at the starting point. Then the factor of safety for any potential slip surface can be computed using limit equilibrium method like Spencer method. After factors of safety for all the potential slip surfaces are obtained, the minimum one is the factor of safety for the slope and the corresponding potential slip surface is the critical slip surface of the slope. The proposed method does not need to pre-assume the shape of potential slip surfaces. Thus it is suitable for any shape of slip surfaces. Moreover the method is very simple to be applied. Examples are presented in this paper to illustrate the feasibility of the proposed method programmed in ANSYS software by macro commands. |
| 语种 | 英语 |
| 公开日期 | 2013-08-12 |
| 源URL | [http://ir.imde.ac.cn/handle/131551/5870]  |
| 专题 | 成都山地灾害与环境研究所_Journal of Mountain Science _Journal of Mountain Science-2011_Vol8 No.5 |
| 推荐引用方式 GB/T 7714 | Xiao Shiguo,Yan Liping,Cheng Zhiqiang. A method combining numerical analysis and limit equilibrium theory to determine potential slip surfaces in soil slopes[J]. JOURNAL OF MOUNTAIN SCIENCE,2011,8(5):718–727. |
| APA | Xiao Shiguo,Yan Liping,&Cheng Zhiqiang.(2011).A method combining numerical analysis and limit equilibrium theory to determine potential slip surfaces in soil slopes.JOURNAL OF MOUNTAIN SCIENCE,8(5),718–727. |
| MLA | Xiao Shiguo,et al."A method combining numerical analysis and limit equilibrium theory to determine potential slip surfaces in soil slopes".JOURNAL OF MOUNTAIN SCIENCE 8.5(2011):718–727. |
入库方式： OAI收割
来源：成都山地灾害与环境研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。