Cold Hydrostatic Sintering: From shaping to 3D printing
文献类型：期刊论文
| 作者 | Jiang, Anna; Ke, Daoyao; Xu, Ludi; Xu, Qiang; Li, Jiang; Wei, Jiabei; Hu, Chunfeng; Grasso, Salvatore |
| 刊名 | JOURNAL OF MATERIOMICS
 |
| 出版日期 | 2019-09-01 |
| 卷号 | 5期号:3页码:496 |
| 关键词 | Silica Cold Hydrostatic Sintering (CHS) Shaping 3D printing |
| ISSN号 | 2352-8478 |
| DOI | 10.1016/j.jmat.2019.02.009 |
| 文献子类 | Article |
| 英文摘要 | We developed a novel consolidation technique, Cold Hydrostatic Sintering (CHS), which allows near full densification of silica. The technique is inspired by biosilicification and geological formation of siliceous rocks. Unlike established cold sintering method which is based on uniaxial pressure, CHS employs an isostatic pressure to enable room temperature consolidation of bulks having a complex three-dimensional shape. The resulting material is transparent (in line transmittance exceeding 70% in the visible range) and amorphous. After drying, the Vickers hardness was as high 1.4 GPa which half of materials consolidated at 1200 degrees C and it is the highest among all materials processed at room temperature. The CHS method, because of its simplicity, might be suitable for broad range of applications including 3D printing, mould forming and preparation of multi-layered devices. Because of the absence of the firing step, CHS could be directly integrated in the manufacturing of a wide range of hybrid (organic/inorganic) materials for functional and biological applications. (C) 2019 The Chinese Ceramic Society. Production and hosting by Elsevier B.V. |
| WOS研究方向 | Chemistry ; Materials Science ; Physics |
| 语种 | 英语 |
| 出版者 | ELSEVIER |
| 源URL | [http://ir.sic.ac.cn/handle/331005/26866]  |
| 专题 | 中国科学院上海硅酸盐研究所 |
| 推荐引用方式 GB/T 7714 | Jiang, Anna,Ke, Daoyao,Xu, Ludi,et al. Cold Hydrostatic Sintering: From shaping to 3D printing[J]. JOURNAL OF MATERIOMICS,2019,5(3):496. |
| APA | Jiang, Anna.,Ke, Daoyao.,Xu, Ludi.,Xu, Qiang.,Li, Jiang.,...&Grasso, Salvatore.(2019).Cold Hydrostatic Sintering: From shaping to 3D printing.JOURNAL OF MATERIOMICS,5(3),496. |
| MLA | Jiang, Anna,et al."Cold Hydrostatic Sintering: From shaping to 3D printing".JOURNAL OF MATERIOMICS 5.3(2019):496. |
入库方式： OAI收割
来源：上海硅酸盐研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。