The preparation of SiC-based ceramics by one novel strategy combined 3D printing technology and liquid silicon infiltration process
文献类型：期刊论文
| 作者 | Zhang, Heng; Yang, Yong; Liu, Bin; Huang, Zhengren |
| 刊名 | CERAMICS INTERNATIONAL
 |
| 出版日期 | 2019-06-01 |
| 卷号 | 45期号:8页码:10800 |
| 关键词 | SiC 3D printing Liquid silicon infiltration Microstructure |
| ISSN号 | 0272-8842 |
| DOI | 10.1016/j.ceramint.2019.02.154 |
| 文献子类 | Article |
| 英文摘要 | SiC-based ceramics with periodic structure were successfully fabricated by extrusion freeforming 3D printing technology and liquid silicon infiltration process. The ceramic slurries containing SiC, carbon black, chopped carbon fiber were firstly prepared with the appropriate viscosity and rheological properties, then were formed by extrusion freeforming 3D printing technology and densified by liquid silicon infiltration sintering successively, to acquire SiC ceramic composites components. The microstructure and morphology of green parts and sintered bodies were observed. Chopped carbon fibers were found to be oriented distribution in SiC ceramic composites parts. The sintered bodies exhibited maximum flexural strength of 300 MPa and sintered linear shrinkage below 2%. The manufacturing method has demonstrated big potential to fabricate ceramic components with personalized complex structure. |
| WOS研究方向 | Materials Science |
| 语种 | 英语 |
| 出版者 | ELSEVIER SCI LTD |
| 源URL | [http://ir.sic.ac.cn/handle/331005/27092]  |
| 专题 | 中国科学院上海硅酸盐研究所 |
| 推荐引用方式 GB/T 7714 | Zhang, Heng,Yang, Yong,Liu, Bin,et al. The preparation of SiC-based ceramics by one novel strategy combined 3D printing technology and liquid silicon infiltration process[J]. CERAMICS INTERNATIONAL,2019,45(8):10800. |
| APA | Zhang, Heng,Yang, Yong,Liu, Bin,&Huang, Zhengren.(2019).The preparation of SiC-based ceramics by one novel strategy combined 3D printing technology and liquid silicon infiltration process.CERAMICS INTERNATIONAL,45(8),10800. |
| MLA | Zhang, Heng,et al."The preparation of SiC-based ceramics by one novel strategy combined 3D printing technology and liquid silicon infiltration process".CERAMICS INTERNATIONAL 45.8(2019):10800. |
入库方式： OAI收割
来源：上海硅酸盐研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。