Microstructure and High PV Wear Behavior of Novel Amorphous Al2O3-YAG Ceramic Coating Fabricated by Atmospheric Plasma Spraying
文献类型：期刊论文
| 作者 | Yang, Kai; Rong, Jian; Zhuang, Yin; Ni, Jinxing; Yang, Jiasheng; Tao, Shunyan; Shao, Fang; Ding, Chuanxian |
| 刊名 | JOURNAL OF THERMAL SPRAY TECHNOLOGY
 |
| 出版日期 | 2019-04-01 |
| 卷号 | 28期号:4页码:803 |
| 关键词 | amorphous oxides high PV wear behavior microstructure plasma spray coatings |
| ISSN号 | 1059-9630 |
| DOI | 10.1007/s11666-019-00846-4 |
| 文献子类 | Article |
| 英文摘要 | The reliability and lifetime of mechanical systems often depend on their capacity to resist to friction and wear under high PV values (P contact pressure; V friction velocity). This study deals with plasma-sprayed amorphous Al2O3-YAG coatings that could be used under such conditions. Their phase transformation, microstructure stability and high PV wear behavior were investigated. The sprayable Al2O3/Y2O3 feedstock was obtained by spray-drying nano-sized Al2O3 and Y2O3 powders. In order to elucidate the effect of the original powder particle size on phase composition and anti-wear property of the coatings, micro-sized Al2O3 and Y2O3 powders were also utilized to produce Al2O3-Y2O3 coating. Simultaneously, Al2O3 coating was also deposited for performance comparison. The combination of coating microstructure analysis, solidification theory of deep eutectic system and practical plasma spraying conditions clarified the formation mechanism of amorphous Al2O3-YAG coating. Furthermore, amorphous Al2O3-YAG coating showed better wear-resistant performance than crystalline Al2O3 and Al2O3-Y2O3 coatings under severe conditions with high PV values, which indicate excellent engineering application potential of the former coating. The relationships between microstructure characteristics and high PV wear behavior of amorphous Al2O3-YAG coating were established, which contribute to deeply understand corresponding friction and wear mechanisms. Graphical AbstractThe rapid solidification temperature (Te) in plasma spraying process is rather lower than the glass transition temperature (Tg) due to the cooling effects in the coating deposition. Amorphous phase is dominant in as-sprayed Al2O3-YAG coating. The amorphous Al2O3-YAG coating has better plastic deformation ability than Al2O3 and Al2O3-Y2O3 coatings. The amorphous Al2O3-YAG coating possesses greater crack propagation resistance. [GRAPHICS] . |
| WOS研究方向 | Materials Science |
| 语种 | 英语 |
| 出版者 | SPRINGER |
| 源URL | [http://ir.sic.ac.cn/handle/331005/27219]  |
| 专题 | 中国科学院上海硅酸盐研究所 |
| 推荐引用方式 GB/T 7714 | Yang, Kai,Rong, Jian,Zhuang, Yin,et al. Microstructure and High PV Wear Behavior of Novel Amorphous Al2O3-YAG Ceramic Coating Fabricated by Atmospheric Plasma Spraying[J]. JOURNAL OF THERMAL SPRAY TECHNOLOGY,2019,28(4):803. |
| APA | Yang, Kai.,Rong, Jian.,Zhuang, Yin.,Ni, Jinxing.,Yang, Jiasheng.,...&Ding, Chuanxian.(2019).Microstructure and High PV Wear Behavior of Novel Amorphous Al2O3-YAG Ceramic Coating Fabricated by Atmospheric Plasma Spraying.JOURNAL OF THERMAL SPRAY TECHNOLOGY,28(4),803. |
| MLA | Yang, Kai,et al."Microstructure and High PV Wear Behavior of Novel Amorphous Al2O3-YAG Ceramic Coating Fabricated by Atmospheric Plasma Spraying".JOURNAL OF THERMAL SPRAY TECHNOLOGY 28.4(2019):803. |
入库方式： OAI收割
来源：上海硅酸盐研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。