Fabrication of zirconia all-ceramic crown via DLP-based stereolithography
文献类型：期刊论文
| 作者 | Li, Xingbang; Zhong, He; Zhang, Jingxian; Duan, Yusen; Li, Jingjing; Jiang, Dongliang |
| 刊名 | INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY
 |
| 出版日期 | 2019-12-31 |
| 关键词 | ceramic stereolithography microstructure rheological properties zirconia all-ceramic crown |
| ISSN号 | 1546-542X |
| DOI | 10.1111/ijac.13441 |
| 文献子类 | Article; Early Access |
| 英文摘要 | Zirconia ceramics have shown a wide applicable prospect in dental prosthetics because it possesses excellent mechanical performance and biocompatibility. The rheological behavior and curing properties of zirconia stereolithography slurry were studied, as well as the microstructure of the green, pyrolyzed, and sintered body. Variquat CC-42 NS was proved to be effective for zirconia powder dispersing in photocurable resin (SP-RC700). The curing characteristic of slurry showed that the depth of penetration tended to increase with the solid loading. Finally, the zirconia all-ceramic crowns were fabricated via DLP-based stereolithography printer. Results showed that the particles were evenly distributed in the cured resin matrix without obvious agglomeration, and the interlayered structure disappeared after binder burnout. The sample with a major crystalline phase of tetragonal zirconia and a porosity of 10(1)% were obtained after sintering at 1550 degrees C. |
| WOS关键词 | MANUFACTURING LCM ; MECHANICAL-PROPERTIES ; SUSPENSIONS ; ALUMINA ; DISPERSION ; VISCOSITY ; QUALITY ; SLURRY |
| WOS研究方向 | Materials Science |
| 语种 | 英语 |
| 出版者 | WILEY |
| 源URL | [http://ir.sic.ac.cn/handle/331005/27446]  |
| 专题 | 中国科学院上海硅酸盐研究所 |
| 推荐引用方式 GB/T 7714 | Li, Xingbang,Zhong, He,Zhang, Jingxian,et al. Fabrication of zirconia all-ceramic crown via DLP-based stereolithography[J]. INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY,2019. |
| APA | Li, Xingbang,Zhong, He,Zhang, Jingxian,Duan, Yusen,Li, Jingjing,&Jiang, Dongliang.(2019).Fabrication of zirconia all-ceramic crown via DLP-based stereolithography.INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY. |
| MLA | Li, Xingbang,et al."Fabrication of zirconia all-ceramic crown via DLP-based stereolithography".INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2019). |
入库方式： OAI收割
来源：上海硅酸盐研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。