Modeling and Selection of RF Thermal Plasma Hot-Wall Torch for Large-Scale Production of Nanopowders
文献类型:期刊论文
作者 | Bai, Liuyang1,2; He, Jiaping1,3; Ouyang, Yuge1; Liu, Wenfu2; Liu, Huichao2; Yao, Haizi2; Li, Zengshuai2; Song, Jun2; Wang, Yinling2; Yuan, Fangli1 |
刊名 | MATERIALS |
出版日期 | 2019-07-01 |
卷号 | 12期号:13页码:15 |
ISSN号 | 1996-1944 |
关键词 | numerical simulation thermal plasma hot-wall torch nanopowder synthesis |
DOI | 10.3390/ma12132141 |
英文摘要 | Fouling is a great problem that significantly affects the continuous operation for large-scale radio-frequency (RF) thermal plasma synthesizing nanopowders. In order to eliminate or weaken the phenomenon, numerical simulations based on FLUENT software were founded to investigate the effect of operation parameters, including feeding style of central gas and sheath gas, on plasma torches. It is shown that the tangential feeding style of central gas brings serious negative axial velocity regions, which always forces the synthesized nanopowders to back-mix, and further leads to the fouling of the quartz tube. Moreover, it is shown that sheath gas should be tangentially fed into the plasma reactor to further eliminate the gas stream's back-mixing. However, when this feeding style is applied, although the negative axial velocity region is decreased, the plasma gas and kinetic energy of the vapor phase near the wall of the plasma reactor are less and lower, respectively; as a result, that plasma flame is more difficult to be arced. A new plasma arcing method by way of feeding gun instead of torch wall was proposed and put in use. The fouling problem has been well solved and plasma arcing is well ensured, and as a result, the experiment on large-scale production of nanopowders can be carried out for 8 h without any interruption, and synthesized Si and Al2O3 nanopowders exhibit good dispersion and sphericity. |
WOS关键词 | HEAT-TRANSFER ; CFD ; NANOPARTICLES ; REACTOR ; ALUMINA ; POWDER |
资助项目 | National Natural Science Foundation of China[11875284] ; National Natural Science Foundation of China[11535003] ; Henan Science and Technology Development Program[192102210029] ; Construction of Master's Program on Energy and Power Engineering in Huanghuai University |
WOS研究方向 | Materials Science |
语种 | 英语 |
出版者 | MDPI |
WOS记录号 | WOS:000477043900105 |
资助机构 | National Natural Science Foundation of China ; Henan Science and Technology Development Program ; Construction of Master's Program on Energy and Power Engineering in Huanghuai University |
源URL | [http://ir.ipe.ac.cn/handle/122111/30429] |
专题 | 中国科学院过程工程研究所 |
通讯作者 | Bai, Liuyang; Yuan, Fangli |
作者单位 | 1.Chinese Acad Sci, Inst Proc Engn, State Key Lab Multiphase Complex Syst, Beijing 100190, Peoples R China 2.Huanghuai Univ, Zhumadian Acad Ind Innovat & Dev, Zhumadian 463000, Peoples R China 3.Jiangsu Jingyuan Environm Protect Co Ltd, Nantong 226001, Peoples R China |
推荐引用方式 GB/T 7714 | Bai, Liuyang,He, Jiaping,Ouyang, Yuge,et al. Modeling and Selection of RF Thermal Plasma Hot-Wall Torch for Large-Scale Production of Nanopowders[J]. MATERIALS,2019,12(13):15. |
APA | Bai, Liuyang.,He, Jiaping.,Ouyang, Yuge.,Liu, Wenfu.,Liu, Huichao.,...&Yuan, Fangli.(2019).Modeling and Selection of RF Thermal Plasma Hot-Wall Torch for Large-Scale Production of Nanopowders.MATERIALS,12(13),15. |
MLA | Bai, Liuyang,et al."Modeling and Selection of RF Thermal Plasma Hot-Wall Torch for Large-Scale Production of Nanopowders".MATERIALS 12.13(2019):15. |
入库方式: OAI收割
来源:过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。