Mechanical Properties and Microstructures of Commercial-Purity Aluminum Processed by Rotational Accelerated Shot Peening Plus Cold Rolling
文献类型:期刊论文
作者 | Liu YF3; Cao Y3; Zhou H3; Chen XF(陈雪飞)2; Liu Y3; Xiao LR3; Huan XW3; Zhao YH3; Zhu YT1,3 |
刊名 | ADVANCED ENGINEERING MATERIALS |
出版日期 | 2020 |
卷号 | 22期号:1页码:8 |
ISSN号 | 1438-1656 |
关键词 | commercial-purity aluminum gradient structures mechanical properties microstructures plastic deformation |
DOI | 10.1002/adem.201900478 |
英文摘要 | Commercial-purity aluminum with 99.7% purity is processed by rotational accelerated shot peening (RASP) and cold-rolling. RASP samples are rolled at room temperature to a thickness reduction of 20% and 30%, for the purpose of surface roughness reduction and strengthening. Detailed microstructural characterization and hardness tests reveal that cold-rolling cause grain growth at the surfaces of RASP samples from approximate to 472 to approximate to 1000 nm. Moderate cold-rolling is effective in smoothing the surface of RASP samples, while improving strength and maintaining ductility. However, cold-rolling to more than 30% thickness reduction eventually diminishes the gradient nanostructure. During cold-rolling of RASP samples, a transition zone with strong strain incompatibility is noticed by a sharp rise in hardness at some point of the hardness-distribution curve from the surface to the core of the sample. This transition zone is a result of quick generation of geometrically necessary dislocations. Although the transition zone with strong strain incompatibility is short-lived, it is anticipated to be common among gradient-nanostructured materials under cold-rolling condition. |
分类号 | 二类 |
WOS关键词 | NANOSTRUCTURED SURFACE-LAYER ; HIGH-PRESSURE TORSION ; GRAIN-REFINEMENT ; STAINLESS-STEEL ; METALS ; SIZE ; DEFORMATION ; TEMPERATURE ; EVOLUTION ; STRENGTH |
WOS研究方向 | Materials Science |
语种 | 英语 |
WOS记录号 | WOS:000508434300006 |
其他责任者 | Liu, Ying ; Xiao, Lirong |
源URL | [http://dspace.imech.ac.cn/handle/311007/81328] |
专题 | 力学研究所_非线性力学国家重点实验室 |
作者单位 | 1.North Carolina State Univ, Dept Mat Sci & Engn, Raleigh, NC 27695 USA 2.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China; 3.Nanjing Univ Sci & Technol, Sch Mat Sci & Engn, Nano & Heterogeneous Mat Ctr, Nanjing 210094, Peoples R China; |
推荐引用方式 GB/T 7714 | Liu YF,Cao Y,Zhou H,et al. Mechanical Properties and Microstructures of Commercial-Purity Aluminum Processed by Rotational Accelerated Shot Peening Plus Cold Rolling[J]. ADVANCED ENGINEERING MATERIALS,2020,22(1):8. |
APA | Liu YF.,Cao Y.,Zhou H.,陈雪飞.,Liu Y.,...&Zhu YT.(2020).Mechanical Properties and Microstructures of Commercial-Purity Aluminum Processed by Rotational Accelerated Shot Peening Plus Cold Rolling.ADVANCED ENGINEERING MATERIALS,22(1),8. |
MLA | Liu YF,et al."Mechanical Properties and Microstructures of Commercial-Purity Aluminum Processed by Rotational Accelerated Shot Peening Plus Cold Rolling".ADVANCED ENGINEERING MATERIALS 22.1(2020):8. |
入库方式: OAI收割
来源:力学研究所
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。