Minimizing the thermal bridge through the columns in a refrigeration room
文献类型:期刊论文
作者 | Jiang XQ3; Lin AQ2; Ma HL1; Li XY3; Li YY3 |
刊名 | APPLIED THERMAL ENGINEERING
![]() |
出版日期 | 2020-01-25 |
卷号 | 165页码:8 |
关键词 | Refrigeration room Thermal bridge Cooling loss Column Heat preservation |
ISSN号 | 1359-4311 |
DOI | 10.1016/j.applthermaleng.2019.114565 |
通讯作者 | Jiang, Xiaoqiang(jiangxq@fjut.edu.cn) |
英文摘要 | Thermal bridges are weakly insulated areas in the envelope of a building that can significantly increase the energy load due to heat dissipation. To improve energy efficiency, a thermal bridge model is established to simulate heat transfer through the column in a refrigeration room. The accuracy of the numerical simulation program is verified by experimental data. A heat preservation method for the column that minimizes the cooling loss is analyzed. The results show that the thermal bridging is mainly due to the steel bar in the column, because the share of the cooling loss attributed to the steel bars is 42.02-55.87%. Moreover, applying heat insulation on the column can provide more energy savings in low-temperature rooms than in high-temperature ones. The most economical thermal insulation method as a function of the height and thickness of the insulation layer is therefore proposed for the low-temperature column. By the optimum method, the amount of heat flux through the whole column section, which includes both reinforced and non-reinforced areas, decreases by 37.34%, and the total cooling loss decreases from 30.23 to 13.66 W, representing a 54.81% reduction. Therefore, a reduction in the cooling loss from thermal bridging is achieved for a low-temperature refrigeration room. |
分类号 | 一类 |
WOS关键词 | ENERGY-CONSUMPTION ; AIR CURTAINS ; COLD STORES ; FLOW ; OPTIMIZATION ; SENSITIVITY ; PERFORMANCE ; LOSSES ; DESIGN ; MODEL |
资助项目 | Leading project of science and technology plan of Fujian Province[2019H0029] |
WOS研究方向 | Thermodynamics ; Energy & Fuels ; Engineering ; Mechanics |
语种 | 英语 |
WOS记录号 | WOS:000503314300007 |
资助机构 | Leading project of science and technology plan of Fujian Province |
其他责任者 | Jiang, Xiaoqiang |
源URL | [http://dspace.imech.ac.cn/handle/311007/81272] ![]() |
专题 | 力学研究所_流固耦合系统力学重点实验室(2012-) |
作者单位 | 1.Chinese Acad Sci, Inst Mech, Beijing 100190, Peoples R China 2.Harbin Engn Univ, Coll Power & Energy Engn, Harbin 150001, Heilongjiang, Peoples R China; 3.Fujian Univ Technol, Sch Ecol Environm & Urban Construct, Fuzhou 350118, Fujian, Peoples R China; |
推荐引用方式 GB/T 7714 | Jiang XQ,Lin AQ,Ma HL,et al. Minimizing the thermal bridge through the columns in a refrigeration room[J]. APPLIED THERMAL ENGINEERING,2020,165:8. |
APA | Jiang XQ,Lin AQ,Ma HL,Li XY,&Li YY.(2020).Minimizing the thermal bridge through the columns in a refrigeration room.APPLIED THERMAL ENGINEERING,165,8. |
MLA | Jiang XQ,et al."Minimizing the thermal bridge through the columns in a refrigeration room".APPLIED THERMAL ENGINEERING 165(2020):8. |
入库方式: OAI收割
来源:力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。