The plastic flow stability of chip materials in metal cutting process
文献类型：期刊论文
| 作者 | Ma W(马维)2 ; Shuang F(双飞)1,2
|
| 刊名 | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
 |
| 出版日期 | 2019-12-01 |
| 卷号 | 105期号:5-6页码:1933-1948 |
| 关键词 | Metal cutting Plastic flow stability Instability criterion Dimensional analysis Transition of chip morphology Cutting energy |
| ISSN号 | 0268-3768 |
| DOI | 10.1007/s00170-019-04353-2 |
| 通讯作者 | Ma, Wei(watwm@imech.ac.cn) |
| 英文摘要 | This study investigates the chip formation mechanism and relevant plastic flow stability in the orthogonal cutting process (OCP) through high-speed cutting experiments and theoretical modelling for four types of metals. The chip morphology transitions from continuous to serrated and to continuous again are observed with critical speeds depending on the work material properties and cutting conditions. To exam the influence of two-dimensional (2D) effects on plastic flow stability, a complete theoretical framework under plane strain state is established to model the 2D orthogonal cutting process. Based on the new framework, a set of governing equations with three dimensionless parameters are used to analytically derive a universal instability criterion, the approximate velocity fields, and stress fields in the expanding chip formation zone (CFZ). It is shown that the plastic flow of continuous chip may become unstable once the cutting speed reaches a critical value. In contrast to the shear localization deformation in the serrated chip, we found a new instability mechanism occurring in the continuous chip which undergoes the uniform but severe shear deformation due to the plane strain loadings. A new dimensionless parameter therefore is proposed to describe the plastic instability in continuous chip and the shear banding instability in serrated chip. The difference of two instability modes is further investigated in terms of dissipation mechanism of cutting energy, and the plastic instability of continuous chip is shown as the best instability mode regarding tool vibration and surface machining quality. These findings provide practical insights into improving modern cutting technology by controlling the plastic flow instability. |
| 分类号 | 二类 |
| WOS关键词 | FORMATION MECHANISMS ; MODEL ; INSTABILITY ; TITANIUM ; SPEED ; TOOL |
| 资助项目 | National Nature Science Foundation of China[11572337] ; National Nature Science Foundation of China[11772346] ; National Nature Science Foundation of China[51575029] |
| WOS研究方向 | Automation & Control Systems ; Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000498491100007 |
| 资助机构 | National Nature Science Foundation of China |
| 其他责任者 | Ma, Wei |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/81264]  |
| 专题 | 力学研究所_流固耦合系统力学重点实验室(2012-) |
| 作者单位 | 1.Univ Florida, Dept Mech & Aerosp Engn, Gainesville, FL 32611 USA 2.Chinese Acad Sci, Inst Mech, Beijing 100190, Peoples R China; |
| 推荐引用方式 GB/T 7714 | Ma W,Shuang F. The plastic flow stability of chip materials in metal cutting process[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,105(5-6):1933-1948. |
| APA | 马维,&双飞.(2019).The plastic flow stability of chip materials in metal cutting process.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,105(5-6),1933-1948. |
| MLA | 马维,et al."The plastic flow stability of chip materials in metal cutting process".INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 105.5-6(2019):1933-1948. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。