Review on residual stress in selective laser melting additive manufacturing of alloy parts
文献类型:期刊论文
作者 | Fang ZC1,2; Wu ZL2; Huang CG(黄晨光)1; Wu CW(吴臣武)1 |
刊名 | OPTICS AND LASER TECHNOLOGY |
出版日期 | 2020-09-01 |
卷号 | 129页码:15 |
ISSN号 | 0030-3992 |
关键词 | SLM Residual stress Modeling Characterizing Adjusting |
DOI | 10.1016/j.optlastec.2020.106283 |
通讯作者 | Wu, Chen-Wu(chenwuwu@imech.ac.cn) |
英文摘要 | The undesirable residual stress accumulated in the parts during the melting and solidification of the metal powder layer by layer retards the further application of the selective laser melting (SLM) process. This paper focuses on reviewing the recent illuminating achievements about physical modeling, experimental characterizing, and active adjusting of the residual stress in the parts fabricated by SLM. The advantages and disadvantages of the mainstream and emerging models or approaches are further analyzed. Based on the status and prospect of the relative techniques, a series of conceptual methods are discussed on mitigating residual stress to make some practical inspiration for developing a systematical residual stress balancing technique for SLM. |
分类号 | 二类/Q1 |
WOS关键词 | FATIGUE-CRACK-GROWTH ; 316L STAINLESS-STEEL ; ELECTRON-BEAM ; MECHANICAL-PROPERTIES ; DIRECTED-ENERGY ; MICROSTRUCTURE EVOLUTION ; PROCESSING PARAMETERS ; SURFACE-ROUGHNESS ; MODELING APPROACH ; THERMAL-BEHAVIOR |
资助项目 | National Natural Science Foundation of China[11572327] ; Strategic Priority Research Program of Chinese Academy of Sciences[XDA17030100] ; Strategic Priority Research Program of Chinese Academy of Sciences[XDA17030200] ; Postgraduate Research & Practice Innovation Program of Jiangsu Province[KYCX19_0273] |
WOS研究方向 | Optics ; Physics |
语种 | 英语 |
WOS记录号 | WOS:000537415900022 |
资助机构 | National Natural Science Foundation of China ; Strategic Priority Research Program of Chinese Academy of Sciences ; Postgraduate Research & Practice Innovation Program of Jiangsu Province |
其他责任者 | Wu, Chen-Wu |
源URL | [http://dspace.imech.ac.cn/handle/311007/82134] |
专题 | 力学研究所_流固耦合系统力学重点实验室(2012-) |
作者单位 | 1.Chinese Acad Sci, Inst Mech, Beijing 100190, Peoples R China 2.Nanjing Univ Sci & Technol, Sch Mech Engn, Nanjing 210094, Peoples R China; |
推荐引用方式 GB/T 7714 | Fang ZC,Wu ZL,Huang CG,et al. Review on residual stress in selective laser melting additive manufacturing of alloy parts[J]. OPTICS AND LASER TECHNOLOGY,2020,129:15. |
APA | Fang ZC,Wu ZL,黄晨光,&吴臣武.(2020).Review on residual stress in selective laser melting additive manufacturing of alloy parts.OPTICS AND LASER TECHNOLOGY,129,15. |
MLA | Fang ZC,et al."Review on residual stress in selective laser melting additive manufacturing of alloy parts".OPTICS AND LASER TECHNOLOGY 129(2020):15. |
入库方式: OAI收割
来源:力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。