EMMS-based solid stress model for the multiphase particle-in-cell method
文献类型：期刊论文
| 作者 | Jiang, Yong1,2,3; Li, Fei1,2,3; Ge, Wei1,2,3; Wang, Wei1,2,3 |
| 刊名 | POWDER TECHNOLOGY
 |
| 出版日期 | 2020-01-15 |
| 卷号 | 360页码:1377-1387 |
| ISSN号 | 0032-5910 |
| 关键词 | Multiphase particle-in-cell Energy minimization multiscale model Solid stress model Fluidization Simulation |
| DOI | 10.1016/j.powtec.2019.09.031 |
| 英文摘要 | A heterogeneous solid stress model based on the energy minimization multiscale (EMMS) model is developed. The EMMS model is used in the multiscale decomposition of a heterogeneous gas-solid system, and the local flow field inside a computational cell can thus be divided into a series of dense phases and a dilute phase with uniform solid distributions. With the solid stress model for each phase, a heterogeneous, EMMS-based solid stress can be determined by accounting for subgrid structure information. Furthermore, this heterogeneous solid stress model is integrated into the multiphase particle-in-cell (MP-PIC) method and implemented with in-house MP-PIC codes. MP-PIC simulations for a circulating fluidized bed (CFB) riser and a bubbling fluidized bed (BFB) show that combining the heterogeneous solid stress model and drag model gives results that best agree with experimental data, even with coarser meshes and larger coarse-grain parameters, benefiting industrial-scale computational fluid dynamics simulation. (C) 2019 Elsevier B.V. All rights reserved. |
| WOS关键词 | CIRCULATING FLUIDIZED-BED ; FILTERED 2-FLUID MODELS ; MP-PIC SIMULATION ; EXPERIMENTAL VALIDATION ; EULERIAN SIMULATION ; CPFD METHOD ; CFB RISER ; LOOP SEAL ; FLOW ; WAVES |
| 资助项目 | National Key R&D Program of China[2017YFB0602700] ; National Natural Science Foundation of China[51876212] ; National Natural Science Foundation of China[21625605] ; National Natural Science Foundation of China[21821005] ; Key Research Program of Frontier Science, CAS[QYZDJ-SSW-JSCO29] ; CAS[0CH13506-301] ; CAS[IAGM-2019-A03] ; 'Transformational Technologies for Clean Energy and Demonstration", Strategic Priority Research Program of the Chinese Academy of Sciences[XDA21030700] |
| WOS研究方向 | Engineering |
| 语种 | 英语 |
| 出版者 | ELSEVIER |
| WOS记录号 | WOS:000506712100122 |
| 资助机构 | National Key R&D Program of China ; National Natural Science Foundation of China ; Key Research Program of Frontier Science, CAS ; CAS ; 'Transformational Technologies for Clean Energy and Demonstration", Strategic Priority Research Program of the Chinese Academy of Sciences |
| 源URL | [http://ir.ipe.ac.cn/handle/122111/38801]  |
| 专题 | 中国科学院过程工程研究所 |
| 通讯作者 | Li, Fei |
| 作者单位 | 1.Chinese Acad Sci, Innovat Acad Green Manufacture, Beijing 100190, Peoples R China 2.Chinese Acad Sci, Inst Proc Engn, State Key Lab Multiphase Complex Syst, Beijing 100190, Peoples R China 3.Univ Chinese Acad Sci, Beijing 100049, Peoples R China |
| 推荐引用方式 GB/T 7714 | Jiang, Yong,Li, Fei,Ge, Wei,et al. EMMS-based solid stress model for the multiphase particle-in-cell method[J]. POWDER TECHNOLOGY,2020,360:1377-1387. |
| APA | Jiang, Yong,Li, Fei,Ge, Wei,&Wang, Wei.(2020).EMMS-based solid stress model for the multiphase particle-in-cell method.POWDER TECHNOLOGY,360,1377-1387. |
| MLA | Jiang, Yong,et al."EMMS-based solid stress model for the multiphase particle-in-cell method".POWDER TECHNOLOGY 360(2020):1377-1387. |
入库方式： OAI收割
来源：过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。