Shear tests of interfaces between calcareous sand and steel
文献类型:期刊论文
作者 | Wang, Xing; Wang, Xin-Zhi; Zhu, Chang-Qi; Meng, Qing-Shan |
刊名 | MARINE GEORESOURCES & GEOTECHNOLOGY
![]() |
出版日期 | 2019 |
卷号 | 37期号:9页码:1095-1104 |
关键词 | Calcareous sand interface normal stress shear test surface roughness |
ISSN号 | 1064-119X |
DOI | 10.1080/1064119X.2018.1529845 |
英文摘要 | Various modified direct shear tests on the interface between calcareous sand and steel with different degrees of roughness were conducted in this article, and the different interface property results between calcareous sand-steel and siliceous sand-steel were compared. It was found that: (1) Under various normal stresses, the limit shear stress at the interface reaches the peak value when the groove depth is at the critical value Rcr. Further, when the flat width is at a critical value Gcr, the limit interface shear stress reaches to that of a grooved surface with a flat width of zero. (2) The magnitudes of Rcr and Gcr are related to the gradation and grain size of sand. For the calcareous sand tested, Rcr and Gcr are three times and seven times the mean grain size, respectively. (3) When the intersection angle between the symmetrical V-shaped grooves and the direct shear direction equals to 45?, the limit interface shear stress reaches the peak value and no significant increase is observed at the larger intersection angle. (4) Under the same interface testing conditions with siliceous and calcareous sands, the interface friction angle of the calcareous sand is ?5??6? greater than that of siliceous sand. |
WOS研究方向 | Engineering ; Oceanography ; Mining & Mineral Processing |
语种 | 英语 |
WOS记录号 | WOS:000488852200007 |
源URL | [http://119.78.100.198/handle/2S6PX9GI/14851] ![]() |
专题 | 岩土力学所知识全产出_期刊论文 国家重点实验室知识产出_期刊论文 |
作者单位 | 1.Chinese Acad Sci, State Key Lab Geomech & Geotech Engn, Inst Rock & Soil Mech, Wuhan 430071, Hubei, Peoples R China; 2.Univ Chinese Acad Sci, Beijing 100049, Peoples R China |
推荐引用方式 GB/T 7714 | Wang, Xing,Wang, Xin-Zhi,Zhu, Chang-Qi,et al. Shear tests of interfaces between calcareous sand and steel[J]. MARINE GEORESOURCES & GEOTECHNOLOGY,2019,37(9):1095-1104. |
APA | Wang, Xing,Wang, Xin-Zhi,Zhu, Chang-Qi,&Meng, Qing-Shan.(2019).Shear tests of interfaces between calcareous sand and steel.MARINE GEORESOURCES & GEOTECHNOLOGY,37(9),1095-1104. |
MLA | Wang, Xing,et al."Shear tests of interfaces between calcareous sand and steel".MARINE GEORESOURCES & GEOTECHNOLOGY 37.9(2019):1095-1104. |
入库方式: OAI收割
来源:武汉岩土力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。