Optimization Analysis of the Position of Thermometers Buried in Concrete Pouring Block Embedded with Cooling Pipes
文献类型：期刊论文
| 作者 | Huang, Yaoying; Xie, Tong; Li, Chunguang; Yin, Xiaohui |
| 刊名 | MATHEMATICAL PROBLEMS IN ENGINEERING
 |
| 出版日期 | 2019 |
| 卷号 | 2019期号:-页码:- |
| ISSN号 | 1024-123X |
| DOI | 10.1155/2019/5256839 |
| 英文摘要 | The measured temperature of a concrete pouring block depends strongly on the position of the buried thermometer. Only when the temperature measured by the thermometer accurately reflects the actual temperature of the concrete pouring block do reasonable temperature-control measures become possible. However, little research has been done on how to determine the proper position of thermometers buried in a concrete pouring block embedded with cooling pipes. To address this situation, we develop herein a method to determine the position of thermometers buried in a concrete pouring block. First, we assume that the design temperature-control process line characterizes the average-temperature history of the concrete pouring block. Under this assumption, we calculate the average-temperature history of the concrete pouring block by using the water-pipe-cooling FEM, following which the temperature history of an arbitrary point in the concrete pouring block is obtained by interpolating the shape function. Based on the average-temperature history of the concrete pouring block and the temperature history of the arbitrary point, we build a mathematical model to optimize the buried position of the thermometer and use the optimization algorithm to determine this position. By using this method, we establish finite-element models of concrete prisms with four typical water-pipe spacing cases for concrete-dam engineering and obtain the geometric position of the thermometers by using the optimization algorithm. By burying thermometers at these positions, the measured temperature should better characterize the average-temperature history of the concrete pouring block, which can provide useful information for regulating the temperature of concrete pouring blocks. |
| WOS研究方向 | Engineering ; Mathematics |
| 语种 | 英语 |
| WOS记录号 | WOS:000475640600001 |
| 源URL | [http://119.78.100.198/handle/2S6PX9GI/14948]  |
| 专题 | 岩土力学所知识全产出_期刊论文 国家重点实验室知识产出_期刊论文 |
| 作者单位 | 1.China Three Gorges Univ, Coll Hydraul & Environm Engn, Yichang 443002, Hubei, Peoples R China; 2.Chinese Acad Sci, Inst Rock & Soil Mech, State Key Lab Geomech & Geotech Engn, Wuhan 430071, Hubei, Peoples R China |
| 推荐引用方式 GB/T 7714 | Huang, Yaoying,Xie, Tong,Li, Chunguang,et al. Optimization Analysis of the Position of Thermometers Buried in Concrete Pouring Block Embedded with Cooling Pipes[J]. MATHEMATICAL PROBLEMS IN ENGINEERING,2019,2019(-):-. |
| APA | Huang, Yaoying,Xie, Tong,Li, Chunguang,&Yin, Xiaohui.(2019).Optimization Analysis of the Position of Thermometers Buried in Concrete Pouring Block Embedded with Cooling Pipes.MATHEMATICAL PROBLEMS IN ENGINEERING,2019(-),-. |
| MLA | Huang, Yaoying,et al."Optimization Analysis of the Position of Thermometers Buried in Concrete Pouring Block Embedded with Cooling Pipes".MATHEMATICAL PROBLEMS IN ENGINEERING 2019.-(2019):-. |
入库方式： OAI收割
来源：武汉岩土力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。