Selection of Optimal Threshold of Generalised Rock Quality Designation Based on Modified Blockiness Index
文献类型：期刊论文
| 作者 | Chen, Qingfa; Yin, Tingchang; Jia, Hangyu |
| 刊名 | ADVANCES IN CIVIL ENGINEERING
 |
| 出版日期 | 2019 |
| 卷号 | 2019期号:-页码:- |
| ISSN号 | 1687-8086 |
| DOI | 10.1155/2019/1340549 |
| 英文摘要 | Rock quality designation (RQD) is a critical index for quantifying the degree of rock mass jointing; it is widely used for evaluating the qualities and stabilities of engineering rock masses. However, the use of traditional RQD may yield inaccurate assessments because only core pieces longer than 100mm are counted. To enhance the utility of RQD, generalised RQD was introduced. Based on the modified blockiness index (MBi), the determination of the optimal threshold of generalised RQD was performed. In this work, 35 types of hypothetical three-dimensional joint network models were constructed, and their generalised RQD values (with different thresholds) and MBi values were measured. The correlation between the standard ratings of MBi and RQD was assessed; based on this correlation, the theoretical RQD values of the 35 models were derived. The reasonable thresholds of the generalised RQD were determined according to the theoretical RQD values, and the optimal threshold of generalised RQD was obtained using the variation coefficient and anisotropy index of the jointing degree. The discrepancy between the results produced using traditional and generalised RQDs was discussed. Finally, an actual case study was conducted, and the results indicate that the generalised RQD associated with the optimal threshold determined in this study can properly quantify the degree of jointing of a given rock mass. |
| WOS研究方向 | Construction & Building Technology ; Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000456533200001 |
| 源URL | [http://119.78.100.198/handle/2S6PX9GI/15096]  |
| 专题 | 岩土力学所知识全产出_期刊论文 国家重点实验室知识产出_期刊论文 |
| 作者单位 | 1.Chinese Acad Sci, Inst Rock & Soil Mech, State Key Lab Geomech & Geotech Engn, Wuhan 430071, Hubei, Peoples R China; 2.Guangxi Univ, Coll Resources Environm & Mat, Nanning 530004, Guangxi, Peoples R China; 3.Cent S Univ, Sch Resources & Safety Engn, Changsha 410083, Hunan, Peoples R China |
| 推荐引用方式 GB/T 7714 | Chen, Qingfa,Yin, Tingchang,Jia, Hangyu. Selection of Optimal Threshold of Generalised Rock Quality Designation Based on Modified Blockiness Index[J]. ADVANCES IN CIVIL ENGINEERING,2019,2019(-):-. |
| APA | Chen, Qingfa,Yin, Tingchang,&Jia, Hangyu.(2019).Selection of Optimal Threshold of Generalised Rock Quality Designation Based on Modified Blockiness Index.ADVANCES IN CIVIL ENGINEERING,2019(-),-. |
| MLA | Chen, Qingfa,et al."Selection of Optimal Threshold of Generalised Rock Quality Designation Based on Modified Blockiness Index".ADVANCES IN CIVIL ENGINEERING 2019.-(2019):-. |
入库方式： OAI收割
来源：武汉岩土力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。