Very-high-cycle fatigue behavior of AlSi10Mg manufactured by selective laser melting: Effect of build orientation and mean stress
文献类型：期刊论文
| 作者 | Qian GA(钱桂安)2,3; Jian ZM2,3 ; Qian YJ1; Pan XN(潘向南)2,3; Ma XF1; Hong YS(洪友士)2,3; Hong YS(洪友士); Qian GA(钱桂安); Pan XN(潘向南)
|
| 刊名 | INTERNATIONAL JOURNAL OF FATIGUE
 |
| 出版日期 | 2020-09-01 |
| 卷号 | 138页码:9 |
| ISSN号 | 0142-1123 |
| 关键词 | Selective laser melting Very-high-cycle fatigue AlSi10Mg Crack initiation Fatigue strength |
| DOI | 10.1016/j.ijfatigue.2020.105696 |
| 英文摘要 | This paper studies the influence of build orientation and mean stress on the very-high-cycle fatigue (VHCF) behavior of AlSi10Mg fabricated by selective laser melting (SLM). Horizontally built specimens demonstrate better mechanical performance than vertically built specimens. Four crack initiation modes are identified for the specimens in high-cycle fatigue (HCF) and VHCF regimes, namely initiation by lack-of-fusion, initiation by internal pore, initiation with no obvious defect and initiation by tearing. Moreover, it turns out that the mean stress accelerates crack initiation, and hence reduces fatigue life. A model is proposed to describe the effect of crack initiation location on fatigue strength. |
| 分类号 | 一类 |
| WOS关键词 | MECHANICAL-PROPERTIES ; GIGACYCLE FATIGUE ; CRACK INITIATION ; LIFE PREDICTION ; CRITICAL PLANE ; VHCF RESPONSE ; STRENGTH ; MICROSTRUCTURE ; TI-6AL-4V ; ALLOY |
| WOS研究方向 | Engineering ; Materials Science |
| 语种 | 英语 |
| WOS记录号 | WOS:000540657100015 |
| 资助机构 | NSFC Basic Science Center Program for Multiscale Problems in Nonlinear Mechanics[11988102] ; National Natural Science Foundation of China[11932020] ; National Natural Science Foundation of China[11872364] ; National Natural Science Foundation of China[11902370] ; CAS Pioneer Hundred Talents Program, Guangdong Major Project of Basic and Applied Basic Research[2019B030302011] ; Guangdong Basic and Applied Basic Research Foundation[2019A050510022] ; Key-Area R&D Program of GuangDong Province[2019B010943001] |
| 其他责任者 | Ma, Xianfeng ; Hong, Youshi |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/84725]  |
| 专题 | 力学研究所_非线性力学国家重点实验室 |
| 作者单位 | 1.Sun Yat Sen Univ, Sino French Inst Nucl Engn & Technol, Zhuhai 519082, Guangdong, Peoples R China 2.Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100049, Peoples R China; 3.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech LNM, Beijing 100190, Peoples R China; |
| 推荐引用方式 GB/T 7714 | Qian GA,Jian ZM,Qian YJ,et al. Very-high-cycle fatigue behavior of AlSi10Mg manufactured by selective laser melting: Effect of build orientation and mean stress[J]. INTERNATIONAL JOURNAL OF FATIGUE,2020,138:9. |
| APA | 钱桂安.,Jian ZM.,Qian YJ.,潘向南.,Ma XF.,...&Pan XN.(2020).Very-high-cycle fatigue behavior of AlSi10Mg manufactured by selective laser melting: Effect of build orientation and mean stress.INTERNATIONAL JOURNAL OF FATIGUE,138,9. |
| MLA | 钱桂安,et al."Very-high-cycle fatigue behavior of AlSi10Mg manufactured by selective laser melting: Effect of build orientation and mean stress".INTERNATIONAL JOURNAL OF FATIGUE 138(2020):9. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。