Development of an assistant program for CAD-to-cosRMC modelling
文献类型：期刊论文
| 作者 | Du, Hua1,3 ; Luo, Yue-Tong2; Han, Chengcun2; Lu, Lei4; Yan, Yiman5; Sun, Yeshuai5; Chen, Yixue5; Liu, Songlin1
|
| 刊名 | FUSION ENGINEERING AND DESIGN
 |
| 出版日期 | 2020-08-01 |
| 卷号 | 157 |
| 关键词 | cosRMC Open Cascade FreeCAD Conversion algorithm |
| ISSN号 | 0920-3796 |
| DOI | 10.1016/j.fusengdes.2020.111662 |
| 通讯作者 | Luo, Yue-Tong(ytluo@hfut.edu.cn) |
| 英文摘要 | cosRMC is a three dimensional neutron photon transport Monte Carlo code based on the stochastic statistical method of neutral particle transport. At present, the cosRMC geometry model is imported by writing the input file manually, which leads to time-consuming, inefficient and error-prone problems. This will limit application of cosRMC in fusion neutronics calculations because of the complex geometry in fusion devices. Therefore, in order to improve the modeling efficiency and meet the requirements of calculation and analysis of advanced nuclear facilities, a visual modeling platform, cosVMPT-Visual Modeling Platform for Particle Transport, is developed based on Open Cascade (OCC) as CAD geometry engine and FreeCAD framework as graphical user interface. This platform can realize the complete process from modeling to calculation, then to visualization. In this article, the conversion algorithm from CAD models to cosRMC geometry models is introduced in detail. The reliability of the conversion algorithm is preliminarily verified with some representative models by comparing volumes change before and after conversion. The result shows that the geometries after conversion are in good consistency with the original geometries. |
| WOS关键词 | CONCEPTUAL DESIGN ; BREEDER BLANKET |
| 资助项目 | National Key R&D Program of China[2017YFE0300501] ; Chinese National Natural Science Foundation[11775256] |
| WOS研究方向 | Nuclear Science & Technology |
| 语种 | 英语 |
| WOS记录号 | WOS:000552961900011 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | National Key R&D Program of China ; Chinese National Natural Science Foundation |
| 源URL | [http://ir.hfcas.ac.cn:8080/handle/334002/70873]  |
| 专题 | 中国科学院合肥物质科学研究院 |
| 通讯作者 | Luo, Yue-Tong |
| 作者单位 | 1.Chinese Acad Sci, Inst Plasma Phys, Hefei 230031, Peoples R China 2.Hefei Univ Technol, Hefei 230009, Peoples R China 3.Univ Sci & Technol China, Hefei 230027, Peoples R China 4.Hefei Univ, Hefei 230009, Peoples R China 5.State Power Investment Corp Res Inst, Natl Energy Key Lab Nucl Power Software, Beijing 102209, Peoples R China |
| 推荐引用方式 GB/T 7714 | Du, Hua,Luo, Yue-Tong,Han, Chengcun,et al. Development of an assistant program for CAD-to-cosRMC modelling[J]. FUSION ENGINEERING AND DESIGN,2020,157. |
| APA | Du, Hua.,Luo, Yue-Tong.,Han, Chengcun.,Lu, Lei.,Yan, Yiman.,...&Liu, Songlin.(2020).Development of an assistant program for CAD-to-cosRMC modelling.FUSION ENGINEERING AND DESIGN,157. |
| MLA | Du, Hua,et al."Development of an assistant program for CAD-to-cosRMC modelling".FUSION ENGINEERING AND DESIGN 157(2020). |
入库方式： OAI收割
来源：合肥物质科学研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。