Design and Electromechanical Properties of Round HTS Strand With Soldered Multilayer Copper Tapes as Filler and Tube
文献类型：期刊论文
| 作者 | Shi, Yi1 ; Liu, Fang1; Liu, Huajun1; Tan, Yunfei3; Zhang, Xingtao1; Jin, Huan1; Chen, Huijuan2
|
| 刊名 | IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
 |
| 出版日期 | 2021 |
| 卷号 | 31 |
| 关键词 | High-temperature superconductors Copper Superconducting cables Strain Critical current density (superconductivity) Superconducting magnets Magnetic multilayers Coated conductor (CC) high-temperature superconducting (HTS) cable round strand stacked cable |
| ISSN号 | 1051-8223 |
| DOI | 10.1109/TASC.2020.3012884 |
| 通讯作者 | Shi, Yi(shiyi@ipp.ac.cn) |
| 英文摘要 | Design and feasible verification of the round high-temperature superconducting (HTS) strand with REBCO tapes is the key technology for future fusion magnet application such as China Fusion Engineering Test Reactor (CFETR). Flat tape configuration of REBCO tapes and incompatibility with cable design based on round low-temperature superconducting (LTS) strand lead to the development of new cable technology. In this article, a HTS strand variant with soldered multilayer copper tapes as filler and tube called SaMiT is developed following the technology path of twisted stacked-tape cable (TSTC). Due to the use of a milling process to form the round strand, the probability of REBCO tapes damage is reduced greatly in the manufacturing process. Meanwhile, the tapes delamination problem and solution is also discussed. The bending and twisting test of the samples are performed to verify the electromechanical characteristics. The measurement result shows the SaMiT has great potential in HTS cable application. Future tests at transverse load and high field are needed for fusion magnet application. |
| 资助项目 | National Key R&D Program of China[2017YFE0300503] ; National Natural Science Foundation of China[U1632276] |
| WOS研究方向 | Engineering ; Physics |
| 语种 | 英语 |
| WOS记录号 | WOS:000568424600001 |
| 出版者 | IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC |
| 资助机构 | National Key R&D Program of China ; National Natural Science Foundation of China |
| 源URL | [http://ir.hfcas.ac.cn:8080/handle/334002/104021]  |
| 专题 | 中国科学院合肥物质科学研究院 |
| 通讯作者 | Shi, Yi |
| 作者单位 | 1.Chinese Acad Sci, Hefei Inst Phys Sci, Hefei 230031, Peoples R China 2.Suzhou Adv Mat Res Inst, Suzhou 215000, Peoples R China 3.Huazhong Univ Sci & Technol, Wuhan Natl High Magnet Field Ctr, Wuhan 430074, Peoples R China |
| 推荐引用方式 GB/T 7714 | Shi, Yi,Liu, Fang,Liu, Huajun,et al. Design and Electromechanical Properties of Round HTS Strand With Soldered Multilayer Copper Tapes as Filler and Tube[J]. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY,2021,31. |
| APA | Shi, Yi.,Liu, Fang.,Liu, Huajun.,Tan, Yunfei.,Zhang, Xingtao.,...&Chen, Huijuan.(2021).Design and Electromechanical Properties of Round HTS Strand With Soldered Multilayer Copper Tapes as Filler and Tube.IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY,31. |
| MLA | Shi, Yi,et al."Design and Electromechanical Properties of Round HTS Strand With Soldered Multilayer Copper Tapes as Filler and Tube".IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY 31(2021). |
入库方式： OAI收割
来源：合肥物质科学研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。