中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
首页 机构 成果 学者
  
  1. CAS IR Grid
  2. 合肥物质科学研究院
  3. 中国科学院合肥物质科学研究院
  4. 中科院等离子体物理研究所
Qualification of ITER PF6 helium inlet

文献类型：期刊论文

作者Du, Shuangsong1,2; Wen, Wei1; Shen, Guang1; Xin, Jijun1; Smith, Kevin3; Sborchia, Carlo3; Readman, Peter3; Song, Yuntao1; Wu, WeiYue1; Wu, Huan1
刊名FUSION ENGINEERING AND DESIGN
出版日期2018-09-01
卷号134页码:1-4
关键词PF6 coil Helium inlet Automatic welding Fatigue test
ISSN号0920-3796
DOI10.1016/j.fusengdes.2018.06.010
通讯作者Wen, Wei(wenwei@ipp.ac.cn)
英文摘要The Poloidal Field (PF) coils are one of the main sub-systems of the ITER magnets. The PF6 coil is being manufactured by the Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP) as per the Poloidal Field coils cooperation agreement signed between ASIPP and Fusion for Energy (F4E). As one of the critical components, helium inlet locates on the innermost turn and supplies the coil with supercritical helium. During Tokamak operation, the helium inlet will undergo huge cyclic electromagnetic loads and thermal cycling during cooling down and warming up. This paper focus on the main steps of ITER PF6 helium inlet qualification. Helium inlet hole drilling and stainless steel wrapping removal were firstly been carried out. Helium inlet welding with full penetration by automatic welding machine was then performed, followed by leak proof test, non-destructive test, fatigue test and tomography test. At the end, the samples were sectioned for micro and macro inspection. The results show ITER PF6 helium inlet qualification has successfully met the requirements of PF procurement agreement(PA) and was approved by ITER IO.
资助项目ASIPP ; F4E ; ITER JO
WOS研究方向Nuclear Science & Technology
语种英语
WOS记录号WOS:000444927900001
出版者ELSEVIER SCIENCE SA
资助机构ASIPP ; ASIPP ; ASIPP ; ASIPP ; ASIPP ; ASIPP ; ASIPP ; ASIPP ; F4E ; F4E ; F4E ; F4E ; F4E ; F4E ; F4E ; F4E ; ITER JO ; ITER JO ; ITER JO ; ITER JO ; ITER JO ; ITER JO ; ITER JO ; ITER JO ; ASIPP ; ASIPP ; ASIPP ; ASIPP ; ASIPP ; ASIPP ; ASIPP ; ASIPP ; F4E ; F4E ; F4E ; F4E ; F4E ; F4E ; F4E ; F4E ; ITER JO ; ITER JO ; ITER JO ; ITER JO ; ITER JO ; ITER JO ; ITER JO ; ITER JO
源URL[http://ir.hfcas.ac.cn:8080/handle/334002/39036]  
专题合肥物质科学研究院_中科院等离子体物理研究所
通讯作者Wen, Wei
作者单位1.Chinese Acad Sci, Inst Plasma Phys, Hefei, Anhui, Peoples R China
2.Univ Sci & Technol China, Hefei, Anhui, Peoples R China
3.Fus Energy, Barcelona, Spain
推荐引用方式
GB/T 7714		 Du, Shuangsong,Wen, Wei,Shen, Guang,et al. Qualification of ITER PF6 helium inlet[J]. FUSION ENGINEERING AND DESIGN,2018,134:1-4.
APA Du, Shuangsong.,Wen, Wei.,Shen, Guang.,Xin, Jijun.,Smith, Kevin.,...&Wu, Huan.(2018).Qualification of ITER PF6 helium inlet.FUSION ENGINEERING AND DESIGN,134,1-4.
MLA Du, Shuangsong,et al."Qualification of ITER PF6 helium inlet".FUSION ENGINEERING AND DESIGN 134(2018):1-4.

入库方式： OAI收割

来源：合肥物质科学研究院

浏览0
下载0
收藏0
其他版本

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。