Studying the mechanical properties of the soil-root interface using the pullout test method
文献类型：期刊论文
| 作者 | Ji, Xiao-dong; Cong, Xu; Dai, Xian-qing; Zhang, Ao; Chen, Li-hua |
| 刊名 | JOURNAL OF MOUNTAIN SCIENCE
 |
| 出版日期 | 2018 |
| 卷号 | 15期号:4页码:882-893 |
| 关键词 | Mechanical properties Soil-root interface Pullout test method Anchorage force Load speed Pinus tabulaeformis |
| ISSN号 | 1672-6316 |
| DOI | 10.1007/s11629-015-3791-4 |
| 文献子类 | Article |
| 英文摘要 | It is important to quantify the effect of the root diameter, the embedment length of the root and load speed on the soil-root interface mechanical properties for studying the root anchorage. The soilroot interface mechanical properties can be obtained through the pullout force and root slippage curve (F-S curve). About 120 Pinus tabulaeformis single roots whose diameters ranged from 1 mm to 10 mm divided into 6 groups based on different root embedment length (50 mm, 100 mm and 150 mm) and different load velocity (10 mm center dot min(-1), 50 mm center dot min(-1), 100 mm center dot min(-1) and 300 mm center dot min(-1)) were investigated using the pullout method. This study aims to explore the mechanical properties of the soil-root interface in the real conditions using the pullout test method. The results showed two kinds of pullout test failure modes during the experimental process: breakage failure and pullout failure. The results showed that the roots were easier to be broken when the root diameter was smaller or the loading speed was larger. The relationship between the maximum anchorage force and root diameter was linear and the linearly dependent coefficient (R-2) was larger than 0.85. The anchorage force increased with the root embedment length. An increase of 10%-15% for the maximum anchorage force was found when load speed increased from 10 to 300 mm.min-1. The mean peak slippage of the root was from 13.81 to 35.79 mm when the load velocity varied from 10 to 300 mm.min-1. The study will be helpful for the design of slopes reinforced by vegetation and in predicting risk of uprooting of trees, and will have practical benefits for understanding the mechanism of landslide. |
| 电子版国际标准刊号 | 1993-0321 |
| 语种 | 英语 |
| WOS记录号 | WOS:000429949900016 |
| 源URL | [http://ir.imde.ac.cn/handle/131551/35431]  |
| 专题 | Journal of Mountain Science_Journal of Mountain Science-2018_Vol15 No.4 |
| 推荐引用方式 GB/T 7714 | Ji, Xiao-dong,Cong, Xu,Dai, Xian-qing,et al. Studying the mechanical properties of the soil-root interface using the pullout test method[J]. JOURNAL OF MOUNTAIN SCIENCE,2018,15(4):882-893. |
| APA | Ji, Xiao-dong,Cong, Xu,Dai, Xian-qing,Zhang, Ao,&Chen, Li-hua.(2018).Studying the mechanical properties of the soil-root interface using the pullout test method.JOURNAL OF MOUNTAIN SCIENCE,15(4),882-893. |
| MLA | Ji, Xiao-dong,et al."Studying the mechanical properties of the soil-root interface using the pullout test method".JOURNAL OF MOUNTAIN SCIENCE 15.4(2018):882-893. |
入库方式： OAI收割
来源：成都山地灾害与环境研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。