Modeling landslide failure surfaces by polynomial surface fitting
文献类型:期刊论文
| 作者 | Tang Chenxiao1,4; Tang Jing3; van Westen Cees J.4; Han Jiannan4; Mavrouli Olga4; Tang Chuan2 |
| 刊名 | GEOMORPHOLOGY
![]() |
| 出版日期 | 2020 |
| 卷号 | 368页码:107358 |
| 关键词 | Landslide Landslide volume estimation Failure surface Slipfitter |
| ISSN号 | 0169-555X |
| DOI | 10.1016/j.geomorph.2020.107358 |
| 产权排序 | 1 |
| 文献子类 | Article |
| 英文摘要 | Estimating landslide volume based on pre- and post-event elevation models without detailed field investigations is still a major challenge due to hidden failure surfaces. A MATLAB model named SLIPMTER was developed to model failure surfaces using polynomial surface to lit the geometry of exposed scarps extracted from Digital Elevation Models (DEMs). To test our model, a series of analog experiments were designed to acquire data for model testing in a controlled environment. The test indicates the only option to simulate failure surfaces with only remotely sensed data, is to assume that the failure surface was outcropping at the toe of slopes. It is not possible to model landslides that do not reach the bottom of slopes without survey data. Using the assumption, the model was tested on real landslides, showing its capability of modeling for multiple landslides over an area in a single simulation, and the possibility to predict potential failure surfaces from a reported crack. The major limitations of the model include the high requirement for the input DEM quality, the incapability to consider underlying bedrock structures, and the difficulty of simulating landslides with complex movements. (C) 2020 Elsevier B.V. All rights reserved. |
| 电子版国际标准刊号 | 1872-695X |
| 语种 | 英语 |
| WOS记录号 | WOS:000571733700006 |
| 源URL | [http://ir.imde.ac.cn/handle/131551/46278] ![]() |
| 专题 | 中国科学院水利部成都山地灾害与环境研究所 |
| 通讯作者 | Tang Chenxiao; Tang Jing |
| 作者单位 | 1.Institute of Mountain Hazard and Environment, Chinese Academy of Sciences, China; 2.State Key Laboratory of Geo-hazard Prevention and Geo-environment Protection (SKLGP), Chengdu University of Technology, China 3.School of Geoscience and Technology, Southwest Petroleum University, China; 4.Faculty of Geo-Information Sciences and Earth Observation (ITC), University of Twente, the Netherlands; |
| 推荐引用方式 GB/T 7714 | Tang Chenxiao,Tang Jing,van Westen Cees J.,et al. Modeling landslide failure surfaces by polynomial surface fitting[J]. GEOMORPHOLOGY,2020,368:107358. |
| APA | Tang Chenxiao,Tang Jing,van Westen Cees J.,Han Jiannan,Mavrouli Olga,&Tang Chuan.(2020).Modeling landslide failure surfaces by polynomial surface fitting.GEOMORPHOLOGY,368,107358. |
| MLA | Tang Chenxiao,et al."Modeling landslide failure surfaces by polynomial surface fitting".GEOMORPHOLOGY 368(2020):107358. |
入库方式: OAI收割
来源:成都山地灾害与环境研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。

