Progress of manufacture technology of CFETR WCCB blanket at ASIPP
文献类型：期刊论文
| 作者 | Wang, Wanjing1 ; Wang, Jichao1,2; Xie, Chunyi1; Li, Qiang1; Qin, Sigui3; Xu, Shiwei3; Liu, Guohui3; Lei, Mingzhun1; Liu, Songlin1; Luo, Guang-Nan1
|
| 刊名 | FUSION ENGINEERING AND DESIGN
 |
| 出版日期 | 2020-10-01 |
| 卷号 | 159 |
| 关键词 | CFETR WCCB blanket Manufacture technology W/Steel and Steel/Steel bonding |
| ISSN号 | 0920-3796 |
| DOI | 10.1016/j.fusengdes.2020.111758 |
| 通讯作者 | Luo, Guang-Nan(gnluo@ipp.ac.cn) |
| 英文摘要 | As one candidate of blankets for China Fusion Engineering Test Reactor (CFETR), the Water Cooled Ceramic Breeder (WCCB) blanket is proposed and designed in Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP). Supported by the National Key R&D Program of China, we formulated a roadmap on its manufacturing. In this work, the research and development (R&D) on bonding technology for W/Steel and Steel/Steel has been summarized first. Bonding quality was evaluated by microstructure observation and mechanical test. In the W/Steel bonding, the effects of interlayer and intermetallics on the joints failure have been discussed. In the Steel/Steel bonding, the deformation issue and the heat treatment of RAFM Steel have been presented. Then the progress on manufacturing technology and bonding quality tests of the middle-size first wall (FW) mockups also have been shown in the paper. Finally, some technology experiments of assembling weld for the sub-components have been discussed. It is considered that this research construct a foundation to manufacture the WCCB component. |
| WOS关键词 | CONCEPTUAL DESIGN ; STEEL |
| 资助项目 | National Key R&D Program of China[2017YFE0300604] ; National Key R&D Program of China[2018YFE0303103] ; Major/Innovative Program of Development Foundation of the Hefei Center for Physical Science and Technology[2018ZYFX001] |
| WOS研究方向 | Nuclear Science & Technology |
| 语种 | 英语 |
| WOS记录号 | WOS:000580835200019 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | National Key R&D Program of China ; Major/Innovative Program of Development Foundation of the Hefei Center for Physical Science and Technology |
| 源URL | [http://ir.hfcas.ac.cn:8080/handle/334002/105061]  |
| 专题 | 中国科学院合肥物质科学研究院 |
| 通讯作者 | Luo, Guang-Nan |
| 作者单位 | 1.Chinese Acad Sci ASIPP, Inst Plasma Phys, Hefei, Peoples R China 2.Shenzhen Univ, Adv Energy Res Ctr, Shenzhen 518060, Peoples R China 3.Adv Technol & Mat Co AT & M, Beijing, Peoples R China |
| 推荐引用方式 GB/T 7714 | Wang, Wanjing,Wang, Jichao,Xie, Chunyi,et al. Progress of manufacture technology of CFETR WCCB blanket at ASIPP[J]. FUSION ENGINEERING AND DESIGN,2020,159. |
| APA | Wang, Wanjing.,Wang, Jichao.,Xie, Chunyi.,Li, Qiang.,Qin, Sigui.,...&Luo, Guang-Nan.(2020).Progress of manufacture technology of CFETR WCCB blanket at ASIPP.FUSION ENGINEERING AND DESIGN,159. |
| MLA | Wang, Wanjing,et al."Progress of manufacture technology of CFETR WCCB blanket at ASIPP".FUSION ENGINEERING AND DESIGN 159(2020). |
入库方式： OAI收割
来源：合肥物质科学研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。