Fabrication, microstructure, and properties of SiC/Al4SiC4 multiphase ceramics via an in-situ formed liquid phase sintering
文献类型：期刊论文
| 作者 | Liu, Junwen; Zhou, Xiaobing; Tatarko, Peter; Yuan, Qin; Zhang, Lan; Wang, Hongjie; Huang, Zhengren; Huang, Qing |
| 刊名 | JOURNAL OF ADVANCED CERAMICS
 |
| 出版日期 | 2020 |
| 卷号 | 9期号:2页码:193-203 |
| 关键词 | LOW-TEMPERATURE SYNTHESIS PLATE-LIKE AL4SIC4 MECHANICAL-PROPERTIES SICF/SIC COMPOSITES OXIDATION BEHAVIOR CARBIDE RESISTANCE STRENGTH |
| DOI | 10.1007/s40145-020-0359-8 |
| 英文摘要 | The SiC/Al4SiC4 composites with the improved mechanical properties and thermal conductivity were fabricated by the in-situ reaction of polycarbosilane (PCS) and Al powders using spark plasma sintering. The addition of 5 wt% yttrium (Y) sintering additive was useful to obtain fully dense samples after sintering at a relatively low temperature of 1650 degrees C, due to the formation of a liquid phase during sintering. The average particle size of the in-situ formed SiC was ~300 nm. The fracture toughness (4.9 MP center dot m(1/2)), Vickers hardness (16.3 GPa), and thermal conductivity (15.8 W/(m center dot K)) of the SiC/Al4SiC4 composite sintered at 1650 degrees C were significantly higher than the hardness (13.2 GPa), fracture toughness (2.16 MPa center dot m(1/2)), and thermal conductivity (7.8 W/(m center dot K)) of the monolithic Al4SiC4 ceramics. The improved mechanical and thermal properties of the composites were attributed to the high density, fine grain size, as well as the optimized grain boundary structure of the SiC/Al4SiC4 composites. |
| 学科主题 | Materials Science |
| 源URL | [http://ir.nimte.ac.cn/handle/174433/19828]  |
| 专题 | 2020专题 2020专题_期刊论文 |
| 作者单位 | Zhou, XB (corresponding author), Chinese Acad Sci, Ningbo Inst Mat Technol & Engn, Engn Lab Adv Energy Mat, Ningbo 315201, Peoples R China. |
| 推荐引用方式 GB/T 7714 | Liu, Junwen,Zhou, Xiaobing,Tatarko, Peter,et al. Fabrication, microstructure, and properties of SiC/Al4SiC4 multiphase ceramics via an in-situ formed liquid phase sintering[J]. JOURNAL OF ADVANCED CERAMICS,2020,9(2):193-203. |
| APA | Liu, Junwen.,Zhou, Xiaobing.,Tatarko, Peter.,Yuan, Qin.,Zhang, Lan.,...&Huang, Qing.(2020).Fabrication, microstructure, and properties of SiC/Al4SiC4 multiphase ceramics via an in-situ formed liquid phase sintering.JOURNAL OF ADVANCED CERAMICS,9(2),193-203. |
| MLA | Liu, Junwen,et al."Fabrication, microstructure, and properties of SiC/Al4SiC4 multiphase ceramics via an in-situ formed liquid phase sintering".JOURNAL OF ADVANCED CERAMICS 9.2(2020):193-203. |
入库方式： OAI收割
来源：宁波材料技术与工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。