Development and Mechanical Characterization of HGMS-EHS-Reinforced Hollow Glass Bead Composites
文献类型：期刊论文
| 作者 | Jiang, Tao; Gao, Yuan; Wang, Ying; Zhao, Zhongxian; Yu, Jinhong; Yang, Ke; Zhao, Yuantao; Li, Wenge; Wu, Xinfeng |
| 刊名 | ACS OMEGA
 |
| 出版日期 | 2020 |
| 卷号 | 5期号:12页码:6725-6737 |
| 关键词 | SYNTACTIC FOAMS MICROSPHERES BEHAVIOR FILLER |
| DOI | 10.1021/acsomega.0c00015 |
| 英文摘要 | Hollow glass microsphere-reinforced epoxy hollow spheres (HGMS-EHSs) were prepared by a "rolling ball method" using expanded polystyrene beads, HGMSs, and epoxy resin (EP). The three-phase epoxy syntactic foam (epoxy/HGMS-EHS-HGMS composite) was fabricated by combining HGMS-EHS as a lightweight filler with EP and HGMS by a "molding method". The HGMS-EHS and epoxy curing agent systems were well mixed by scanning electron microscopy. Experiments show that higher HGMS-EHS stack volume fraction, lower HGMS-EHS layer number, higher HGMS-EHS diameter, lower HGMS-EHS density, higher HGMS volume fraction, and lower HGMS density result in a decrease in the density of the three-phase epoxy syntactic foam. However, the above factors have the opposite effect on the compressive strength of the three-phase epoxy syntactic foam. Therefore, in order to obtain the "high-strength and low-density" three-phase epoxy syntactic foam, the influence of various factors should be considered comprehensively to achieve the best balance of compressive strength and density of the three-phase epoxy syntactic foam. This can provide some advice for the preparation of buoyancy materials for deep sea operations. |
| 学科主题 | Chemistry |
| 源URL | [http://ir.nimte.ac.cn/handle/174433/19846]  |
| 专题 | 2020专题 2020专题_期刊论文 |
| 作者单位 | 1.Wu, XF (corresponding author), Shanghai Maritime Univ, Coll Ocean Sci & Engn, Shanghai 201306, Peoples R China. 2.Zhao, YT 3.Li, WG (corresponding author), Shanghai Maritime Univ, Merchant Marine Coll, Shanghai 201306, Peoples R China. |
| 推荐引用方式 GB/T 7714 | Jiang, Tao,Gao, Yuan,Wang, Ying,et al. Development and Mechanical Characterization of HGMS-EHS-Reinforced Hollow Glass Bead Composites[J]. ACS OMEGA,2020,5(12):6725-6737. |
| APA | Jiang, Tao.,Gao, Yuan.,Wang, Ying.,Zhao, Zhongxian.,Yu, Jinhong.,...&Wu, Xinfeng.(2020).Development and Mechanical Characterization of HGMS-EHS-Reinforced Hollow Glass Bead Composites.ACS OMEGA,5(12),6725-6737. |
| MLA | Jiang, Tao,et al."Development and Mechanical Characterization of HGMS-EHS-Reinforced Hollow Glass Bead Composites".ACS OMEGA 5.12(2020):6725-6737. |
入库方式： OAI收割
来源：宁波材料技术与工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。