Structural, tribological and corrosion properties of plasma nitrided-chromized-316L stainless steel in air and artificial seawater
文献类型：期刊论文
| 作者 | Ping, Jing; Cui, Xuejun; Pu, Jibin; Jiang, Xin; Zhang, Xuedong; Zhong, Yichao |
| 刊名 | SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES
 |
| 出版日期 | 2020 |
| 卷号 | 8期号:1 |
| 关键词 | DUPLEX SURFACE-TREATMENT STICK-SLIP MICROSTRUCTURE EVOLUTION AISI 304-STAINLESS-STEEL MECHANICAL-PROPERTIES TEMPERATURE-RANGE CHROMIUM NITRIDE WEAR BEHAVIOR SLIDING WEAR RESISTANCE |
| DOI | 10.1088/2051-672X/ab6438 |
| 英文摘要 | To improve the protective performance of 316L stainless steel surface in seawater, a series of modified layers on the 316L stainless steel were fabricated by plasma nitriding, vacuum solid powder chromizing and duplex surface treatment of nitriding-chromizing, respectively. The microstructure, mechanical properties, tribological properties and corrosion resistance of different modified layers were contrastively investigated. The results of x-ray diffraction (XRD) and transmission electron microscope (TEM) showed that the nitrided layer was mainly CrN and Fe4N phases, and the chromized layer was mainly Fe-Cr and Cr23C6 phases. The surface hardness of 316L stainless steel was improved to varying degrees by nitriding and chromizing due to the formation of hard phases such as CrN and Cr23C6 on the surface of 316L. The friction coefficient and wear rate can be obviously reduced by nitriding treatment. However, the nitriding treatment can cause the precipitation of Cr from the solid solution of 316L to form CrN, resulting in the decrease of corrosion resistance in seawater. In contrast, chromizing treatment can significantly improve the corrosion resistance of 316L by increasing the chromium content of stainless steel surface. The duplex surface treatment of nitriding and chromizing made the 316L stainless steel had the highest surface hardness and plastic deformation resistance and showed the excellent tribological properties in both atmosphere and seawater. |
| 学科主题 | Engineering ; Instruments & Instrumentation ; Materials Science |
| 源URL | [http://ir.nimte.ac.cn/handle/174433/19931]  |
| 专题 | 2020专题 2020专题_期刊论文 |
| 作者单位 | 1.Jiang, X (corresponding author), Southwest Jiaotong Univ, Sch Mat Sci & Engn, Key Lab Adv Technol Mat, Minist Educ, Chengdu 610031, Peoples R China. 2.Cui, XJ (corresponding author), Sichuan Univ Sci & Engn, Sch Mat Sci & Engn, Zigong 643000, Sichuan, Peoples R China. 3.Jiang, X (corresponding author), Chinese Acad Sci, Ningbo Inst Mat Technol & Engn, Key Lab Marine Mat & Related Technol, Key Lab Marine Mat & Protect Technol Zhejiang Pro, Ningbo 315201, Peoples R China. |
| 推荐引用方式 GB/T 7714 | Ping, Jing,Cui, Xuejun,Pu, Jibin,et al. Structural, tribological and corrosion properties of plasma nitrided-chromized-316L stainless steel in air and artificial seawater[J]. SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES,2020,8(1). |
| APA | Ping, Jing,Cui, Xuejun,Pu, Jibin,Jiang, Xin,Zhang, Xuedong,&Zhong, Yichao.(2020).Structural, tribological and corrosion properties of plasma nitrided-chromized-316L stainless steel in air and artificial seawater.SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES,8(1). |
| MLA | Ping, Jing,et al."Structural, tribological and corrosion properties of plasma nitrided-chromized-316L stainless steel in air and artificial seawater".SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES 8.1(2020). |
入库方式： OAI收割
来源：宁波材料技术与工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。