Properties of ABS/Organic-Attapulgite Nanocomposites Parts Fabricated by Fused Deposition Modeling
文献类型：期刊论文
| 作者 | Wang, Ling; Jiang, Shenglong; Huang, Chenchen; Dai, Pengyuan; Liu, Fenghua; Qi, Xiaopeng; Xu, Gaojie |
| 刊名 | JOURNAL OF RENEWABLE MATERIALS
 |
| 出版日期 | 2020 |
| 卷号 | 8期号:11页码:1505-1518 |
| 关键词 | MECHANICAL-PROPERTIES CARBON-FIBER COMPOSITES MORPHOLOGY PROMISES |
| DOI | 10.32604/jrm.2020.010544 |
| 英文摘要 | The paper discusses the mechanical and thermal performance manifested in natural nanorods attapulgite (ATP) reinforced Acrylonitrile butadiene styrene (ABS) nanocomposites in the process of fused deposition modeling (FDM). Molten extrusion technique was taken to manufacture the filaments of ABS/ organic-attapulgite ( OAT) nanocomposites with different mass fraction and the printing operation was made by one commercial FDM three-dimensional (3D) printer. Results indicate that the mechanical performance of these FDM 3D printed specimens are improved obviously via the introduction of OAT, and tensile strength of the ABS/OAT nanocomposites parts with only 2 wt% OAT addition is enhanced by 48.1%. At the same time, the addition OAT can reduce the linear expansion coefficient and creep flexibility, and improve the thermal stability and dimensional accuracy of these FDM 3D printed parts. |
| 学科主题 | Science & Technology - Other Topics ; Materials Science ; Polymer Science |
| 源URL | [http://ir.nimte.ac.cn/handle/174433/20250]  |
| 专题 | 2020专题 2020专题_期刊论文 |
| 作者单位 | Liu, FH (corresponding author), Chinese Acad Sci, Ningbo Inst Mat Technol & Engn, Key Lab Addit Mfg Mat Zhejiang Prov, Ningbo 315201, Peoples R China. |
| 推荐引用方式 GB/T 7714 | Wang, Ling,Jiang, Shenglong,Huang, Chenchen,et al. Properties of ABS/Organic-Attapulgite Nanocomposites Parts Fabricated by Fused Deposition Modeling[J]. JOURNAL OF RENEWABLE MATERIALS,2020,8(11):1505-1518. |
| APA | Wang, Ling.,Jiang, Shenglong.,Huang, Chenchen.,Dai, Pengyuan.,Liu, Fenghua.,...&Xu, Gaojie.(2020).Properties of ABS/Organic-Attapulgite Nanocomposites Parts Fabricated by Fused Deposition Modeling.JOURNAL OF RENEWABLE MATERIALS,8(11),1505-1518. |
| MLA | Wang, Ling,et al."Properties of ABS/Organic-Attapulgite Nanocomposites Parts Fabricated by Fused Deposition Modeling".JOURNAL OF RENEWABLE MATERIALS 8.11(2020):1505-1518. |
入库方式： OAI收割
来源：宁波材料技术与工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。