Cold Spraying: A New Alternative Preparation Method for Nickel-Based High-Temperature Solid-Lubrication Coating
文献类型:期刊论文
作者 | Chen, Jie; Song, Hui; Liu, Guang; Ma, Bing; An, Yulong; Jia, Li |
刊名 | JOURNAL OF THERMAL SPRAY TECHNOLOGY |
出版日期 | 2020 |
关键词 | ELEVATED-TEMPERATURES MECHANICAL-PROPERTIES FRICTION WEAR PERFORMANCE CONTACT |
DOI | 10.1007/s11666-020-01088-5 |
英文摘要 | Cold spraying was first used for the purpose of preparing nickel-based high-temperature lubrication coatings. High-quality In625-Cr2O3-Ag composite coatings were deposited by a high-pressure cold-spray system, and their tribological properties were evaluated at 20 and 1000 degrees C by a high-temperature tribometer. The microstructure, composition, and wear mechanisms of the coatings were analyzed by x-ray diffraction, scanning electron microscopy, and Raman spectroscopy. The measurements showed that the cold-sprayed In625-Cr2O3-Ag composite coatings have a very dense structure, good bonding strength to substrate, low friction coefficient, and excellent wear resistance. The friction coefficients of the In625-Cr2O3-Ag coatings were around 0.3 and the wear rates of the coating were maintained at about 10(-5) mm(3)/N m at 20 and 1000 degrees C. The experimental observation of the wear tracks revealed that the silver provided lubrication at 20 degrees C. As the temperature increased up to 1000 degrees C, a lubrication layer with low shear strength made up of Ag(2)MoO(4)and Cr(2)O(3)was formed on the wear track. |
学科主题 | Materials Science |
源URL | [http://ir.nimte.ac.cn/handle/174433/20487] |
专题 | 2020专题 2020专题_期刊论文 |
作者单位 | Chen, J (corresponding author), Inner Mongolia Metall Mat Res Inst, Ningbo 315103, Peoples R China. |
推荐引用方式 GB/T 7714 | Chen, Jie,Song, Hui,Liu, Guang,et al. Cold Spraying: A New Alternative Preparation Method for Nickel-Based High-Temperature Solid-Lubrication Coating[J]. JOURNAL OF THERMAL SPRAY TECHNOLOGY,2020. |
APA | Chen, Jie,Song, Hui,Liu, Guang,Ma, Bing,An, Yulong,&Jia, Li.(2020).Cold Spraying: A New Alternative Preparation Method for Nickel-Based High-Temperature Solid-Lubrication Coating.JOURNAL OF THERMAL SPRAY TECHNOLOGY. |
MLA | Chen, Jie,et al."Cold Spraying: A New Alternative Preparation Method for Nickel-Based High-Temperature Solid-Lubrication Coating".JOURNAL OF THERMAL SPRAY TECHNOLOGY (2020). |
入库方式: OAI收割
来源:宁波材料技术与工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。