Microstructure and mechanical properties of the AlON/Ti6Al4V active element brazing joint
文献类型：期刊论文
| 作者 | Li, C; Zhang, KP; Mao, XJ; Si, XQ; Lan, B; Liu, ZG; Huang, YX; Qi, JL; Feng, JC; Cao, J |
| 刊名 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
 |
| 出版日期 | 2020-08-19 |
| ISSN号 | 0921-5093 |
| DOI | 10.1016/j.msea.2020.139859 |
| 文献子类 | Article |
| 英文摘要 | Joining the transparent ceramic with metal could help to realise their applications. In this paper, the AlON ceramic was successfully bonded to the Ti6Al4V using the active element brazing approach. The microstructure of the achieved joints is characterised via scanning electron microscope (SEM), electron probe microanalyser (EPMA) and transmission electron microscope (TEM), which turned out to be AlON/Ti-3(Cu,Al)(3)O/Ag(s,s) and Cu (s,s)/Ti4Cu/TiCu/Ti2Cu/Ti6Al4V. The effects of the brazing temperature and the holding time on the microstructure and the shear strength of the joint are investigated. It is found that with the increase of the brazing temperature and the holding time, the thickness of the Ti-3(Cu, Al)(3)O, TiCu and Ti2Cu reaction layers increases while the thickness of the Ti4Cu reaction layer declines. The shear strength of the joint first increases with the brazing temperature/holding time and then decreases. The highest shear strength of 78.3 MPa is achieved when the joint is achieved at 840 degrees C for 10 min. The relationship between the joint microstructure and its mechanical properties is also revealed. |
| WOS关键词 | TRANSPARENT CERAMICS ; AG ; YAG ; ALON ; TEMPERATURE ; SAPPHIRE ; ALUMINA |
| WOS研究方向 | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| 出版者 | ELSEVIER SCIENCE SA |
| 源URL | [http://ir.sic.ac.cn/handle/331005/27822]  |
| 专题 | 中国科学院上海硅酸盐研究所 |
| 推荐引用方式 GB/T 7714 | Li, C,Zhang, KP,Mao, XJ,et al. Microstructure and mechanical properties of the AlON/Ti6Al4V active element brazing joint[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2020. |
| APA | Li, C.,Zhang, KP.,Mao, XJ.,Si, XQ.,Lan, B.,...&Cao, J.(2020).Microstructure and mechanical properties of the AlON/Ti6Al4V active element brazing joint.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. |
| MLA | Li, C,et al."Microstructure and mechanical properties of the AlON/Ti6Al4V active element brazing joint".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020). |
入库方式： OAI收割
来源：上海硅酸盐研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。