中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Powder Characteristics on the Rheological Performance of Resin-based Zirconia Suspension for Stereolithography

文献类型:期刊论文

作者Li, XB; Zhong, H; Zhang, JX; Duan, YS; Jiang, DL
刊名JOURNAL OF INORGANIC MATERIALS
出版日期2020-02-20
期号2页码:231
ISSN号1000-324X
DOI10.15541/jim20190091
文献子类Article
英文摘要As for ceramic stereolithography technique, the preparation of suitable resin-based ceramic slurry is of primary importance. In this study, the effects of powder characteristics such as specific surface area, particle size and distribution, particle morphology on the rheological behavior of zirconia resin-based suspensions were investigated intensively. Results show that the specific surface area of the powder is the most important factor affecting slurry viscosity. Choosing low specific surface area and quasi-spherical shaped powder is more likely to obtain low viscosity slurries. In addition, the influence of solid loading on the flow behavior were also studied using Krieger-Dougherty model. Zirconia samples with the relative density of (97.83 +/- 0.33)% were obtained after sintering at 1550 V. No obvious abnormal grain growth in the microstructure of the sintered body is observed. Results indicate that after the optimization of the processing parameters with the help of rheology characterization, complex-shaped high-quality zirconia parts can be obtained using the stereolithography technique.
WOS关键词ALUMINA CERAMICS ; FABRICATION ; SILICA
WOS研究方向Materials Science
语种英语
出版者SCIENCE PRESS
源URL[http://ir.sic.ac.cn/handle/331005/28291]  
专题中国科学院上海硅酸盐研究所
推荐引用方式
GB/T 7714
Li, XB,Zhong, H,Zhang, JX,et al. Powder Characteristics on the Rheological Performance of Resin-based Zirconia Suspension for Stereolithography[J]. JOURNAL OF INORGANIC MATERIALS,2020(2):231.
APA Li, XB,Zhong, H,Zhang, JX,Duan, YS,&Jiang, DL.(2020).Powder Characteristics on the Rheological Performance of Resin-based Zirconia Suspension for Stereolithography.JOURNAL OF INORGANIC MATERIALS(2),231.
MLA Li, XB,et al."Powder Characteristics on the Rheological Performance of Resin-based Zirconia Suspension for Stereolithography".JOURNAL OF INORGANIC MATERIALS .2(2020):231.

入库方式: OAI收割

来源:上海硅酸盐研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。