Mechanical model and removal mechanism of unidirectional carbon fibre-reinforced ceramic composites
文献类型：期刊论文
| 作者 | Qu, Shuoshuo; Gong, Yadong; Yang, Yuying; Xu, Yunchao; Wang, Wenwen; Xin, Bo; Pang, Shengyang |
| 刊名 | INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
 |
| 出版日期 | 2020-05-01 |
| 卷号 | 173 |
| DOI | 10.1016/j.ijmecsci.2020.105465 |
| 英文摘要 | Numerous scholars have researched the influences of grinding parameters on the surface quality and grinding forces of carbon fibre-reinforced silicon carbide ceramic matrix (C-f/SiC) composites. Nevertheless, the relevant mechanical model and removal mechanism have not been investigated from a microscale perspective. To develop a mechanical model, the area of formation of the grinding chips should be analysed in detail and discussed. The supporting conditions and debonding depth are critical to the grinding forces. To validate the reliability of the mechanical model, experiments with the same grinding parameters were performed. The differences between the theoretical and experimental results were small, which indicated that the mechanical model was accurate and reasonable. Based on the theoretical analyses and experimental results, the material removal mechanism was explored in detail. Based on the topographies of the grinding chips and surfaces, the failure processes of the fibre and matrix due to the forward motion of the abrasive grains were analysed. As the grinding depth increased, the evaluation indexes of the debonding depth, grinding forces and grinding chips gradually increased. Moreover, the increasing proportions of fibre pullout and fibre outcrop indicated that the quality of the grinding surface decreased. Based on the research findings, the debonding depths, grinding forces, grinding chips and surface topographies of unidirectional C-f/SiC composites can be determined, which is expected to significantly improve the machining ability of C-f/SiC composites. |
| WOS记录号 | WOS:000531024300004 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/82905]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Qu, Shuoshuo,Gong, Yadong,Yang, Yuying,et al. Mechanical model and removal mechanism of unidirectional carbon fibre-reinforced ceramic composites[J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2020,173. |
| APA | Qu, Shuoshuo.,Gong, Yadong.,Yang, Yuying.,Xu, Yunchao.,Wang, Wenwen.,...&Pang, Shengyang.(2020).Mechanical model and removal mechanism of unidirectional carbon fibre-reinforced ceramic composites.INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,173. |
| MLA | Qu, Shuoshuo,et al."Mechanical model and removal mechanism of unidirectional carbon fibre-reinforced ceramic composites".INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES 173(2020). |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。