Tool Orientation Optimization and Path Planning for 5-Axis Machining
文献类型：期刊论文
| 作者 | Yuan, Chunming1,2; Mi, Zhenpeng1,2; Jia, Xiaohong1,2; Lin, Fengming2; Shen, Liyong2 |
| 刊名 | JOURNAL OF SYSTEMS SCIENCE & COMPLEXITY
 |
| 出版日期 | 2020-09-09 |
| 页码 | 24 |
| 关键词 | 5-axis CNC machining flat end cutter tool path planning tool posture optimization |
| ISSN号 | 1009-6124 |
| DOI | 10.1007/s11424-020-9270-1 |
| 英文摘要 | Tool path generation is a fundamental problem in 5-axis CNC machining, which consists of tool orientation planning and cutter-contact (CC) point planning. The planning strategy highly depends on the type of tool cutters. For ball-end cutters, the tool orientation and CC point location can be planned separately; while for flat end cutters, the two are highly dependent on each other. This paper generates a smooth tool path of workpiece surfaces for flat end mills from two stages: Computing smooth tool orientations on the surface without gouging and collisions and then designing the CC point path. By solving the tool posture optimization problem the authors achieve both the path smoothness and the machining efficiency. Experimental results are provided to show the effectiveness of the method. |
| 资助项目 | National Natural Science Foundation of China[11688101] ; National Natural Science Foundation of China[61872332] ; Beijing National Natural Science Foundation[Z190004] ; National Center for Mathematics and Interdisciplinary Sciences ; Youth Innovation Promotion Association of the Chinese Academy of Sciences |
| WOS研究方向 | Mathematics |
| 语种 | 英语 |
| WOS记录号 | WOS:000567745200010 |
| 出版者 | SPRINGER HEIDELBERG |
| 源URL | [http://ir.amss.ac.cn/handle/2S8OKBNM/52145]  |
| 专题 | 中国科学院数学与系统科学研究院 |
| 通讯作者 | Shen, Liyong |
| 作者单位 | 1.Chinese Acad Sci, Acad Math & Syst Sci, KLMM, Beijing 100190, Peoples R China 2.Univ Chinese Acad Sci, Sch Math Sci, Beijing 100049, Peoples R China |
| 推荐引用方式 GB/T 7714 | Yuan, Chunming,Mi, Zhenpeng,Jia, Xiaohong,et al. Tool Orientation Optimization and Path Planning for 5-Axis Machining[J]. JOURNAL OF SYSTEMS SCIENCE & COMPLEXITY,2020:24. |
| APA | Yuan, Chunming,Mi, Zhenpeng,Jia, Xiaohong,Lin, Fengming,&Shen, Liyong.(2020).Tool Orientation Optimization and Path Planning for 5-Axis Machining.JOURNAL OF SYSTEMS SCIENCE & COMPLEXITY,24. |
| MLA | Yuan, Chunming,et al."Tool Orientation Optimization and Path Planning for 5-Axis Machining".JOURNAL OF SYSTEMS SCIENCE & COMPLEXITY (2020):24. |
入库方式： OAI收割
来源：数学与系统科学研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。