Bubble-based EMMS/DP drag model for MP-PIC simulation
文献类型：期刊论文
| 作者 | Kadyrov, Tagir1,3; Li, Fei2,3; Wang, Wei1,3 |
| 刊名 | POWDER TECHNOLOGY
 |
| 出版日期 | 2020-07-15 |
| 卷号 | 372页码:611-624 |
| 关键词 | Bubble Meso-scale EMMS drag model MP-PIC Fluidization Simulation |
| ISSN号 | 0032-5910 |
| DOI | 10.1016/j.powtec.2020.06.023 |
| 英文摘要 | To account for the sub-grid heterogeneity of bubbling gas-solid flows in the multi-phase particle-in-cell (MP-PIC) method, a bubble-based EMMS/DP drag model is proposed in this work by taking into account the particle/parcel position information. The local, inter-parcel porosity is calculated by using the method of smoothed particle hydrodynamics (SPH), while the intra-parcel porosity is closed by using the Energy Minimization Multi-scale (EMMS) model. The local velocities of gas phase and different solid parcels are determined by using the constraint of pressure drop balance between phases as in the EMMS/bubbling model. The drag force acting on each parcel is then determined with the sub-grid information of velocities and porosities. Two cases of bubbling fluidized bed are simulated to validate this drag model. And the results show good agreement with experimental data. (C) 2020 Elsevier B.V. All rights reserved. |
| WOS关键词 | DISCRETE PARTICLE SIMULATION ; FLUIDIZED-BEDS ; FLOW STRUCTURE ; MIXTURE MODEL ; CFB RISERS ; SOLIDS ; DIAMETER ; SYSTEMS ; VOIDAGE ; SIZE |
| 资助项目 | National Natural Science Foundation of China[51876212] ; National Natural Science Foundation of China[21625605] ; National Natural Science Foundation of China[U1710251] ; National Key R&D Program of China[2017YFB0602700] ; CAS-TWAS ; Innovation Academy for Green Manufacture, Chinese Academy of Sciences[IAGM-2019-A13] |
| WOS研究方向 | Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000558906000055 |
| 出版者 | ELSEVIER |
| 资助机构 | National Natural Science Foundation of China ; National Key R&D Program of China ; CAS-TWAS ; Innovation Academy for Green Manufacture, Chinese Academy of Sciences |
| 源URL | [http://ir.ipe.ac.cn/handle/122111/41666]  |
| 专题 | 中国科学院过程工程研究所 |
| 通讯作者 | Li, Fei |
| 作者单位 | 1.Univ Chinese Acad Sci, Beijing 100049, Peoples R China 2.Chinese Acad Sci, Innovat Acad Green Manufacture, Beijing 100049, Peoples R China 3.Chinese Acad Sci, Inst Proc Engn, State Key Lab Multiphase Complex Syst, Beijing 100190, Peoples R China |
| 推荐引用方式 GB/T 7714 | Kadyrov, Tagir,Li, Fei,Wang, Wei. Bubble-based EMMS/DP drag model for MP-PIC simulation[J]. POWDER TECHNOLOGY,2020,372:611-624. |
| APA | Kadyrov, Tagir,Li, Fei,&Wang, Wei.(2020).Bubble-based EMMS/DP drag model for MP-PIC simulation.POWDER TECHNOLOGY,372,611-624. |
| MLA | Kadyrov, Tagir,et al."Bubble-based EMMS/DP drag model for MP-PIC simulation".POWDER TECHNOLOGY 372(2020):611-624. |
入库方式： OAI收割
来源：过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。