Crack initiation behavior and fatigue performance up to very-high-cycle regime of AlSi10Mg fabricated by selective laser melting with two powder sizes
文献类型：期刊论文
| 作者 | Jian ZM(渐徵墨)3,4; Qian GA(钱桂安)3,4 ; Paolino, D. S.2; Tridello, A.2; Berto, F.1; Hong YS(洪友士)3,4
|
| 刊名 | INTERNATIONAL JOURNAL OF FATIGUE
 |
| 出版日期 | 2021-02-01 |
| 卷号 | 143页码:12 |
| 关键词 | Selective laser melting AlSi10Mg VHCF Defects Crack initiation |
| ISSN号 | 0142-1123 |
| DOI | 10.1016/j.ijfatigue.2020.106013 |
| 通讯作者 | Qian, G. A.(qianguian@imech.ac.cn) ; Hong, Y. S.(hongys@imech.ac.cn) |
| 英文摘要 | The high-cycle and very-high-cycle fatigue (VHCF) behavior of AlSi10Mg specimens manufactured by selective laser melting with different printing powder sizes was investigated. The specimens with 20 mu m powder size contained more defects than those with 50 mu m powder size, and the latter have a higher fatigue property than the former. Unmelted powders were detected as the main source of crack initiation. The specimens printed with 50 mu m powder size are more likely to feature subsurface crack initiation in the VHCF regime. Five different types of crack initiation modes were identified, and the fatigue strength was assessed by statistical model. |
| 分类号 | 一类 |
| 资助项目 | NSFC Basic Science Center Program[11988102] ; National Natural Science Foundation of China[11872364] ; National Natural Science Foundation of China[11932020] ; National Natural Science Foundation of China[12072345] ; CAS Pioneer Hundred Talents Program |
| WOS研究方向 | Engineering ; Materials Science |
| 语种 | 英语 |
| WOS记录号 | WOS:000597143800002 |
| 资助机构 | NSFC Basic Science Center Program ; National Natural Science Foundation of China ; CAS Pioneer Hundred Talents Program |
| 其他责任者 | Qian, G. A. ; Hong, Y. S. |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/85870]  |
| 专题 | 力学研究所_非线性力学国家重点实验室 |
| 作者单位 | 1.Norwegian Univ Sci & Technol NTNU, Dept Mech & Ind Engn, Richard Birkelands Vei 2b, N-7491 Trondheim, Norway 2.Politecn Torino, Dept Mech & Aerosp Engn, I-10129 Turin, Italy; 3.Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100049, Peoples R China; 4.Chinese Acad Sci, State Key Lab Nonlinear Mech LNM, Inst Mech, Beijing 100190, Peoples R China; |
| 推荐引用方式 GB/T 7714 | Jian ZM,Qian GA,Paolino, D. S.,et al. Crack initiation behavior and fatigue performance up to very-high-cycle regime of AlSi10Mg fabricated by selective laser melting with two powder sizes[J]. INTERNATIONAL JOURNAL OF FATIGUE,2021,143:12. |
| APA | 渐徵墨,钱桂安,Paolino, D. S.,Tridello, A.,Berto, F.,&洪友士.(2021).Crack initiation behavior and fatigue performance up to very-high-cycle regime of AlSi10Mg fabricated by selective laser melting with two powder sizes.INTERNATIONAL JOURNAL OF FATIGUE,143,12. |
| MLA | 渐徵墨,et al."Crack initiation behavior and fatigue performance up to very-high-cycle regime of AlSi10Mg fabricated by selective laser melting with two powder sizes".INTERNATIONAL JOURNAL OF FATIGUE 143(2021):12. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。