Finite element analysis on the first wall electron beam welding of test blanket module
文献类型：期刊论文
| 作者 | Zhang, Yong1,2 ; Wu, Jiefeng1,3; Liu, Zhihong1,3; Liu, Songlin1; Lei, Mingzhun1; Ma, Jianguo1,3; Atif, Muhammad2; Liu, Zhenfei1,3; Wang, Rui1; Shen, Xv1,3
|
| 刊名 | FUSION ENGINEERING AND DESIGN
 |
| 出版日期 | 2021 |
| 卷号 | 162 |
| 关键词 | Vacuum electron beam welding Temperature field Residual stress Welding deformation Finite element analysis |
| ISSN号 | 0920-3796 |
| DOI | 10.1016/j.fusengdes.2020.112131 |
| 通讯作者 | Wu, Jiefeng(jfw@ipp.ac.cn) |
| 英文摘要 | Test blanket module (TBM) uses the welding technology in its development process due to a component of the fusion test reactor. Electron beam welding (EBW) is selected as the welding of the TBM's structure. As a part of the TBM, in the EBW process of the first wall (FW), there are a variety of welding processes for its selection. Here, geometry, thermal cycles, and the deformation characteristics of the FW under the two welding processes are simulated and analyzed by the finite element model. The results show that the equivalent stress of the second welding process is greater than that of the first welding process. For welding deformation, the first welding process is larger than the second welding process in the X and Z directions, but its position is different. In the Y direction, the welding deformation of the two welding processes is similar. |
| WOS关键词 | TEMPERATURE ; SIMULATION ; MODEL |
| 资助项目 | National Key R&D Program of China[2017YFE0300604] ; National Key R&D Program of China[2017YFE0300503] |
| WOS研究方向 | Nuclear Science & Technology |
| 语种 | 英语 |
| WOS记录号 | WOS:000603550400009 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | National Key R&D Program of China |
| 源URL | [http://ir.hfcas.ac.cn:8080/handle/334002/120017]  |
| 专题 | 中国科学院合肥物质科学研究院 |
| 通讯作者 | Wu, Jiefeng |
| 作者单位 | 1.Chinese Acad Sci, Inst Plasma Phys, Hefei 230031, Peoples R China 2.Univ Sci & Technol China, Dept Polymer Sci & Engn, CAS Key Lab Soft Matter Chem, Hefei 230026, Peoples R China 3.Anhui Prov Key Lab Special Welding Technol, Huainan 232000, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhang, Yong,Wu, Jiefeng,Liu, Zhihong,et al. Finite element analysis on the first wall electron beam welding of test blanket module[J]. FUSION ENGINEERING AND DESIGN,2021,162. |
| APA | Zhang, Yong.,Wu, Jiefeng.,Liu, Zhihong.,Liu, Songlin.,Lei, Mingzhun.,...&Xiong, Qiuyue.(2021).Finite element analysis on the first wall electron beam welding of test blanket module.FUSION ENGINEERING AND DESIGN,162. |
| MLA | Zhang, Yong,et al."Finite element analysis on the first wall electron beam welding of test blanket module".FUSION ENGINEERING AND DESIGN 162(2021). |
入库方式： OAI收割
来源：合肥物质科学研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。