Thermo-mechanical assessment of the optimized CFETR water cooled ceramic breeder blanket
文献类型：期刊论文
| 作者 | Ma, Xuebin2,3; Cheng, Xiaoman1 ; Liu, Songlin1; Huang, Kai1
|
| 刊名 | FUSION ENGINEERING AND DESIGN
 |
| 出版日期 | 2020-11-01 |
| 卷号 | 160 |
| 关键词 | Thermal-hydraulic analysis Thermo-mechanical analysis WCCB blanket CFETR |
| ISSN号 | 0920-3796 |
| DOI | 10.1016/j.fusengdes.2020.111798 |
| 通讯作者 | Huang, Kai(huangkai@ipp.ac.cn) |
| 英文摘要 | The Water Cooled Ceramic Breeder (WCCB) blanket is one of the candidates for Chinese Fusion Engineering Test Reactor (CFETR). Within the framework of the engineering design of CFETR, an updated design of WCCB blanket was proposed corresponding to the latest core parameters (major radius = 7.2 m, minus radius = 2.2 m). Thermalhydraulic analyses preliminarily showed the feasibility of the previous blanket design. However, the flow distribution of the blanket was unsatisfactory. Thus, optimization of cooling systems of the blanket was performed accordingly. The optimized blanket design as well as the hydraulic analysis results are presented. Then, in order to investigate the thermal-hydraulic and thermo-mechanical behaviors of the optimized WCCB blanket under normal and accidental operation scenarios, thermo-mechanical analyses were performed following a computational approach based on the Finite Element Method (FEM), using the ANSYS commercial FEM code. The obtained results were assessed in order to verify the compliance with the blanket design criteria ITER SDC-IC code. Structural feasibility of the optimized blanket design was verified. |
| 资助项目 | National Key R&D Program of China[2017YFE0300502] ; National Natural Science Foundation of China[11775256] |
| WOS研究方向 | Nuclear Science & Technology |
| 语种 | 英语 |
| WOS记录号 | WOS:000588143300009 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | National Key R&D Program of China ; National Natural Science Foundation of China |
| 源URL | [http://ir.hfcas.ac.cn:8080/handle/334002/120505]  |
| 专题 | 中国科学院合肥物质科学研究院 |
| 通讯作者 | Huang, Kai |
| 作者单位 | 1.Chinese Acad Sci, Inst Plasma Phys, Hefei 330031, Peoples R China 2.Shenzhen Univ, Adv Energy Res Ctr, Shenzhen 518060, Peoples R China 3.Shenzhen Univ, Coll Optoelect Engn, Key Lab Optoelect Devices & Syst, Minist Educ & Guangdong Prov, Shenzhen 518060, Peoples R China |
| 推荐引用方式 GB/T 7714 | Ma, Xuebin,Cheng, Xiaoman,Liu, Songlin,et al. Thermo-mechanical assessment of the optimized CFETR water cooled ceramic breeder blanket[J]. FUSION ENGINEERING AND DESIGN,2020,160. |
| APA | Ma, Xuebin,Cheng, Xiaoman,Liu, Songlin,&Huang, Kai.(2020).Thermo-mechanical assessment of the optimized CFETR water cooled ceramic breeder blanket.FUSION ENGINEERING AND DESIGN,160. |
| MLA | Ma, Xuebin,et al."Thermo-mechanical assessment of the optimized CFETR water cooled ceramic breeder blanket".FUSION ENGINEERING AND DESIGN 160(2020). |
入库方式： OAI收割
来源：合肥物质科学研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。