A three-dimensional analytical solution of the microheater temperature before bubble nucleation
文献类型：期刊论文
| 作者 | Tang, Q. H.1,2; Xu, J. L.1 |
| 刊名 | applied thermal engineering
 |
| 出版日期 | 2008-08-01 |
| 卷号 | 28期号:11-12页码:1491-1501 |
| 关键词 | bubble nucleation microheater tree-dimensional analytical solution |
| ISSN号 | 1359-4311 |
| 通讯作者 | xujl@ms.giec.ac.cn |
| 中文摘要 | a three-dimensional analytical solution of the microheater temperature based on heat diffusion equation is developed and compared with experimental results. dimensionless parameters are introduced to analyze the temperature rise time and the distribution under steady state. to study the microheater temperatures before bubble nucleation, a set of working fluids and microheaters are considered. it is shown that the dimensionless time xi(-)(0) required for the temperature rise from room to 95% of the steady state temperature is about 75, not dependent on working fluids and microheaters. heat transfer to the surrounding liquid is mainly caused by conduction, not by convection and radiation mechanisms. the microheater length affects the surface temperature uniformity, while its width influences the steady temperatures significantly, yielding the transition from heterogeneous to homogeneous nucleation mechanism from square microheaters to narrow line microheaters. |
| 英文摘要 | a three-dimensional analytical solution of the microheater temperature based on heat diffusion equation is developed and compared with experimental results. dimensionless parameters are introduced to analyze the temperature rise time and the distribution under steady state. to study the microheater temperatures before bubble nucleation, a set of working fluids and microheaters are considered. it is shown that the dimensionless time xi(-)(0) required for the temperature rise from room to 95% of the steady state temperature is about 75, not dependent on working fluids and microheaters. heat transfer to the surrounding liquid is mainly caused by conduction, not by convection and radiation mechanisms. the microheater length affects the surface temperature uniformity, while its width influences the steady temperatures significantly, yielding the transition from heterogeneous to homogeneous nucleation mechanism from square microheaters to narrow line microheaters. (c) 2007 elsevier ltd. all rights reserved. |
| WOS标题词 | science & technology ; physical sciences ; technology |
| 类目[WOS] | thermodynamics ; energy & fuels ; engineering, mechanical ; mechanics |
| 研究领域[WOS] | thermodynamics ; energy & fuels ; engineering ; mechanics |
| 关键词[WOS] | boiling nucleation ; heat-transfer ; liquids ; water ; behavior ; hexane ; wire ; flow |
| 收录类别 | SCI |
| 原文出处 | http://www.sciencedirect.com/science/journal/13594311 |
| 语种 | 英语 |
| WOS记录号 | WOS:000255791400027 |
| 公开日期 | 2010-09-23 |
| 源URL | [http://ir.giec.ac.cn/handle/344007/3432]  |
| 专题 | 中国科学院广州能源研究所 |
| 作者单位 | 1.Chinese Acad Sci, Guangzhou Inst Energy Convers, Micro Energy Syst Lab, Key Lab Renewable Energy & Gas Hydrate, Guangzhou 510640, Peoples R China 2.Univ Sci & Technol China, Dept Thermal & Energy Engn, Hefei 230027, Peoples R China |
| 推荐引用方式 GB/T 7714 | Tang, Q. H.,Xu, J. L.. A three-dimensional analytical solution of the microheater temperature before bubble nucleation[J]. applied thermal engineering,2008,28(11-12):1491-1501. |
| APA | Tang, Q. H.,&Xu, J. L..(2008).A three-dimensional analytical solution of the microheater temperature before bubble nucleation.applied thermal engineering,28(11-12),1491-1501. |
| MLA | Tang, Q. H.,et al."A three-dimensional analytical solution of the microheater temperature before bubble nucleation".applied thermal engineering 28.11-12(2008):1491-1501. |
入库方式： OAI收割
来源：广州能源研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。