中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
首页 机构 成果 学者
  
  1. CAS IR Grid
  2. 海洋研究所
  3. 中国科学院海洋研究所
  4. 海洋腐蚀与防护研究发展中心
The Effects of Different Post-Heat Treatments on Rolling Contact Fatigue Behaviors of Direct Laser Cladding Inconel 625 Coatings

文献类型：期刊论文

作者Zhang, Qiaoxin3,4; Chen, Rui3; Jin, Ding4; Zhou, Chen4; Li, Xuewu1,2,5
刊名JOURNAL OF RENEWABLE MATERIALS
出版日期2021
卷号9期号:1页码:129-144
关键词Laser cladding Inconel 625 coating heat treatment rolling contact fatigue microstructure
ISSN号2164-6325
DOI10.32604/jrm.2021.011596
通讯作者Zhou, Chen(397794895@qq.com) ; Li, Xuewu(lixuewu55@xust.edu.cn)
英文摘要In this paper, the microstructures and rolling contact fatigue behaviors of laser cladding Inconel 625 coatings with or without post-heat treatments were analyzed. The results revealed that the fatigue resistance of the laser cladding coating after any post-heat treatment was worse than that of the as-deposited coating. First, through the finite element analysis, the distribution of stress along the thickness direction of the coating was obtained, and it was concluded that the bonding interface between the coating and the matrix had little effect on the fatigue properties of the coating. Then X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS) were used to analyze the microstructure and failure morphology. The results revealed that the subsurface failure morphology of the coatings showed a consistent correlation with rolling fatigue property after different heat treatments. The TCP phase and carbides have been shown in the laser cladding coating. The coating after stress relieved annealing exhibited chain-shaped granular carbides on the grain boundaries which could accelerate crack propagation. The aging heat treatment made small amounts of Laves phase dissolved in the coating, while the dispersed phase was precipitated which could result in the formation of pores. And the solution treatment made large amounts of Laves phase dissolved, while the rod-shape brittle phases were generated which was easy to fracture and contribute to crack initiation and spalling.
资助项目National Natural Science Foundation of China[51875425] ; Open Fund of Shandong Key Laboratory of Corrosion Science[KLCS201907]
WOS研究方向Science & Technology - Other Topics ; Materials Science ; Polymer Science
语种英语
WOS记录号WOS:000599642800010
出版者TECH SCIENCE PRESS
源URL[http://ir.qdio.ac.cn/handle/337002/169450]  
专题海洋研究所_海洋腐蚀与防护研究发展中心
通讯作者Zhou, Chen; Li, Xuewu
作者单位1.Xian Univ Sci & Technol, Sch Mech Engn, Xian 710054, Peoples R China
2.Chinese Acad Sci, Inst Oceanol, Shandong Key Lab Corros Sci, Qingdao 266071, Peoples R China
3.Wuhan Univ Technol, Sch Mat Sci & Engn, Wuhan 430070, Peoples R China
4.Wuhan Univ Technol, Sch Mech & Elect Engn, Wuhan 430070, Peoples R China
5.Tsinghua Univ, State Key Lab Tribol, Beijing 100084, Peoples R China
推荐引用方式
GB/T 7714		 Zhang, Qiaoxin,Chen, Rui,Jin, Ding,et al. The Effects of Different Post-Heat Treatments on Rolling Contact Fatigue Behaviors of Direct Laser Cladding Inconel 625 Coatings[J]. JOURNAL OF RENEWABLE MATERIALS,2021,9(1):129-144.
APA Zhang, Qiaoxin,Chen, Rui,Jin, Ding,Zhou, Chen,&Li, Xuewu.(2021).The Effects of Different Post-Heat Treatments on Rolling Contact Fatigue Behaviors of Direct Laser Cladding Inconel 625 Coatings.JOURNAL OF RENEWABLE MATERIALS,9(1),129-144.
MLA Zhang, Qiaoxin,et al."The Effects of Different Post-Heat Treatments on Rolling Contact Fatigue Behaviors of Direct Laser Cladding Inconel 625 Coatings".JOURNAL OF RENEWABLE MATERIALS 9.1(2021):129-144.

入库方式： OAI收割

来源：海洋研究所

浏览0
下载0
收藏0
其他版本

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。