中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Recovery of Collided RFID Tags With Frequency Drift on Physical Layer

文献类型:期刊论文

作者Junzhi Li; Haifeng Wu; Yu Zeng
刊名IEEE/CAA Journal of Automatica Sinica
出版日期2020
卷号7期号:6页码:1593-1603
关键词Frequency drift radial basis function (RBF) radio frequency identification (RFID) separation efficiency tag collision
ISSN号2329-9266
DOI10.1109/JAS.2019.1911720
英文摘要In a passive ultra-high frequency (UHF) radio frequency identification (RFID) system, the recovery of collided tag signals on a physical layer can enhance identification efficiency. However, frequency drift is very common in UHF RFID systems, and will have an influence on the recovery on the physical layer. To address the problem of recovery with the frequency drift, this paper adopts a radial basis function (RBF) network to separate the collision signals, and decode the signals via FM0 to recovery collided RFID tags. Numerical results show that the method in this paper has better performance of symbol error rate (SER) and separation efficiency compared to conventional methods when frequency drift occurs.
源URL[http://ir.ia.ac.cn/handle/173211/43060]  
专题自动化研究所_学术期刊_IEEE/CAA Journal of Automatica Sinica
推荐引用方式
GB/T 7714
Junzhi Li,Haifeng Wu,Yu Zeng. Recovery of Collided RFID Tags With Frequency Drift on Physical Layer[J]. IEEE/CAA Journal of Automatica Sinica,2020,7(6):1593-1603.
APA Junzhi Li,Haifeng Wu,&Yu Zeng.(2020).Recovery of Collided RFID Tags With Frequency Drift on Physical Layer.IEEE/CAA Journal of Automatica Sinica,7(6),1593-1603.
MLA Junzhi Li,et al."Recovery of Collided RFID Tags With Frequency Drift on Physical Layer".IEEE/CAA Journal of Automatica Sinica 7.6(2020):1593-1603.

入库方式: OAI收割

来源:自动化研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。