Formability and process conditions of magnesium alloy sheets
文献类型：期刊论文
| 作者 | Zhang, SH; Xu, YC; Palumbo, G; Pinto, S; Tricarico, L; Wang, ZT; Zhang, QL |
| 刊名 | MAGNESIUM - SCIENCE, TECHNOLOGY AND APPLICATIONS
 |
| 出版日期 | 2005 |
| 卷号 | 488-489页码:453-456 |
| ISSN号 | 0255-5476 |
| 关键词 | wrought magnesium alloy Mg sheet sheet forming warm deep drawing |
| 英文摘要 | Comparing the formability with each other, extrusion and various rolling experiments were carried out to make fine-grained AZ31 Mg sheets, and uni-axial tensile tests were carried out at different strain rates and temperatures to investigate the effect of different variables. A warm deep drawing tool setup with heating elements, which were distributed under the die surface and inside the blank holder, was designed and manufactured, and deep drawing was performed. Extruded Mg alloy AZ31 sheets exhibit the best deep drawing ability when working in the temperature range 250-350 degrees C. Extruded and rolled sheets of 0.8 mm thick were also deep drawn in the lower temperature range 105-170 degrees C, showing good formability and reaching a Limit Drawing Ratio up to 2.6 at 170 degrees C for rolled sheets. At last, a sheet cup 0.4 mm thick was deep drawn successfully at 170 degrees C. |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| 出版者 | TRANS TECH PUBLICATIONS LTD |
| WOS记录号 | WOS:000230390900101 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/83319]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 1.Shanghai Jiao Tong Univ, Shanghai 200030, Peoples R China 2.Chinese Acad Sci, Met Res Inst, Shenyang 110016, Peoples R China 3.Politecn Bari, Dept Mech & Management Engn, Bari, Italy |
| 推荐引用方式 GB/T 7714 | Zhang, SH,Xu, YC,Palumbo, G,et al. Formability and process conditions of magnesium alloy sheets[J]. MAGNESIUM - SCIENCE, TECHNOLOGY AND APPLICATIONS,2005,488-489:453-456. |
| APA | Zhang, SH.,Xu, YC.,Palumbo, G.,Pinto, S.,Tricarico, L.,...&Zhang, QL.(2005).Formability and process conditions of magnesium alloy sheets.MAGNESIUM - SCIENCE, TECHNOLOGY AND APPLICATIONS,488-489,453-456. |
| MLA | Zhang, SH,et al."Formability and process conditions of magnesium alloy sheets".MAGNESIUM - SCIENCE, TECHNOLOGY AND APPLICATIONS 488-489(2005):453-456. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。