Effect of tin content on microstructures and mechanical properties of Ti(C,N)/NiCr cermets
文献类型：期刊论文
| 作者 | Wang, QZ; Liu, Y; Guan, DH; Yu, BH; Chen, ZL; Bi, J |
| 刊名 | ACTA METALLURGICA SINICA
 |
| 出版日期 | 2005-11-01 |
| 卷号 | 41期号:11页码:1121-1126 |
| 关键词 | Ti(C, N)/NiCr cermet microstructure mechanical property |
| ISSN号 | 0412-1961 |
| 通讯作者 | Liu, Y() |
| 英文摘要 | Ti(C,N)/NiCr cermets were vacuum sintered by powder metallurgy technology. The effects of TiN additions on microstructures and mechanical properties of Ti(C, N)/NiCr cermets were investigated. Results revealed that the hard phase particles were refined and the morphology of the particles changed from a circular to a polygonal shape by the additions of TiN because of the formation of Ti(C,N) solid solution; With increasing TiN additions, the bonding strength increased to the maximum values at 4%TiN content during low sintering temperature and at 6%TiN content during high sintering temperature, respectively, and then decreased. Hardness changed little when TiN addition was less than 10%, but decreased dramatically when TiN addition exceeded 10%. Fracture photograph showed that trans-granular fracture was the main failure mode because of the good interface. bonding strength between binding phase and ceramic hard phase. |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000233702000002 |
| 出版者 | SCIENCE PRESS |
| 源URL | [http://ir.imr.ac.cn/handle/321006/84915]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Liu, Y |
| 作者单位 | 1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 2.Project Qual Supervis Stn Shenyang, Shenyang 110002, Peoples R China |
| 推荐引用方式 GB/T 7714 | Wang, QZ,Liu, Y,Guan, DH,et al. Effect of tin content on microstructures and mechanical properties of Ti(C,N)/NiCr cermets[J]. ACTA METALLURGICA SINICA,2005,41(11):1121-1126. |
| APA | Wang, QZ,Liu, Y,Guan, DH,Yu, BH,Chen, ZL,&Bi, J.(2005).Effect of tin content on microstructures and mechanical properties of Ti(C,N)/NiCr cermets.ACTA METALLURGICA SINICA,41(11),1121-1126. |
| MLA | Wang, QZ,et al."Effect of tin content on microstructures and mechanical properties of Ti(C,N)/NiCr cermets".ACTA METALLURGICA SINICA 41.11(2005):1121-1126. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。