Finite element simulation of the thermal properties of particulate and continuous network-reinforced metal-matrix composites
文献类型：期刊论文
| 作者 | Liu, XD; Zhang, JS; Cao, XM; Zhang, H |
| 刊名 | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
 |
| 出版日期 | 2005 |
| 卷号 | 219期号:1页码:111-121 |
| 关键词 | finite element analysis coefficient of thermal expansion thermal conductivity three-dimensional network-reinforced composites thermal stresses |
| ISSN号 | 0954-4054 |
| DOI | 10.1243/095440505X8055 |
| 通讯作者 | Liu, XD(xdliu@imr.ac.cn) |
| 英文摘要 | An analysis of the effective coefficient of thermal expansion (CTE) and thermal conductivity (TC) of metal-matrix composites was conducted, focusing on composites with potential for use in electronic packaging applications. Using the finite element method, these thermal properties were simulated on discontinuous SiC-particle and continuous three-dimensional SiC-network-reinforced Al-matrix composites. The calculated CTEs of particle-reinforced composites agree well with those predicted by the Kerner model. While these CTEs increase with increasing temperature, the composites with SiC networks were found to exhibit the opposite trend in the high-temperature region (above about 250 degrees C). The TCs of the three-dimensional SiC-network-reinforced composites are found to be much less sensitive to volume fraction of reinforcement than those of particle-reinforced composites. Continuous three-dimensional network-reinforced composites possess a higher TC than particulate composites, and their CTEs agree well with those of the electronic devices. Therefore, it is possible to use three-dimensional SiC-network-reinforced Al-matrix composites as electronic packaging materials to achieve a high heat dissipation rate and yet to minimize interfacial stresses resulting from a CTE mismatch. |
| WOS研究方向 | Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000228764300009 |
| 出版者 | PROFESSIONAL ENGINEERING PUBLISHING LTD |
| 源URL | [http://ir.imr.ac.cn/handle/321006/85067]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Liu, XD |
| 作者单位 | 1.Univ Toledo, Mech Ind & Mfg Engn Dept, Toledo, OH 43606 USA 2.Chinese Acad Sci, Met Res Inst, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Liu, XD,Zhang, JS,Cao, XM,et al. Finite element simulation of the thermal properties of particulate and continuous network-reinforced metal-matrix composites[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2005,219(1):111-121. |
| APA | Liu, XD,Zhang, JS,Cao, XM,&Zhang, H.(2005).Finite element simulation of the thermal properties of particulate and continuous network-reinforced metal-matrix composites.PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,219(1),111-121. |
| MLA | Liu, XD,et al."Finite element simulation of the thermal properties of particulate and continuous network-reinforced metal-matrix composites".PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE 219.1(2005):111-121. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。