An experimental study of the rapid continuous solidification of Al-Bi immiscible alloy
文献类型:期刊论文
作者 | He, J; Zhao, JZ; Wang, XF; Li, ZY |
刊名 | ACTA METALLURGICA SINICA
![]() |
出版日期 | 2006 |
卷号 | 42期号:1页码:67-72 |
关键词 | Al-Bi immiscible alloy rapid continuous solidification solidification rate microstructure |
ISSN号 | 0412-1961 |
通讯作者 | He, J(JieHe@imr.ac.cn) |
英文摘要 | The experiment of rapid continuous solidification of Al-Bi immiscible alloys with composition ranged from 3.4% to 15% (mass fraction) Bi has been carried out. The influences of the Bi content and the casting rate on the microstructure evolution during the rapid continuous solidification have been investigated. It has been indicated that the average size of the Bi-rich particles increases with the increase of the Bi content. Increasing the casting rate is in favor of the preparation of immiscible alloy with dispersed microstructure. The size distribution of the Bi-rich particles has been analyzed, and it was shown that the size variation of the Bi-rich particles along the axial and radial directions of the sample is not distinct, while on the sample surface the particle size is relative small. It is indicated that the rapid continuous solidification is a potential technique to be used in the manufacturing of immiscible alloy. |
WOS研究方向 | Metallurgy & Metallurgical Engineering |
语种 | 英语 |
WOS记录号 | WOS:000235687800012 |
出版者 | SCIENCE PRESS |
源URL | [http://ir.imr.ac.cn/handle/321006/86651] ![]() |
专题 | 金属研究所_中国科学院金属研究所 |
通讯作者 | He, J |
作者单位 | Chinese Acad Sci, Met Res Inst, Shenyang 110016, Peoples R China |
推荐引用方式 GB/T 7714 | He, J,Zhao, JZ,Wang, XF,et al. An experimental study of the rapid continuous solidification of Al-Bi immiscible alloy[J]. ACTA METALLURGICA SINICA,2006,42(1):67-72. |
APA | He, J,Zhao, JZ,Wang, XF,&Li, ZY.(2006).An experimental study of the rapid continuous solidification of Al-Bi immiscible alloy.ACTA METALLURGICA SINICA,42(1),67-72. |
MLA | He, J,et al."An experimental study of the rapid continuous solidification of Al-Bi immiscible alloy".ACTA METALLURGICA SINICA 42.1(2006):67-72. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。