Solidification microstructure of the gasatomized drop of Cu-20%Co alloy
文献类型:期刊论文
| 作者 | Zhao Jiuzhou; Li Haili; Gao Lingling; He Jie |
| 刊名 | ACTA METALLURGICA SINICA
![]() |
| 出版日期 | 2007-04-01 |
| 卷号 | 43期号:4页码:385-387 |
| 关键词 | Cu-20%Co alloy gas atomization rapid solidification microstructure |
| ISSN号 | 0412-1961 |
| 通讯作者 | Zhao Jiuzhou(jzzhao@imr.ac.cn) |
| 英文摘要 | Rapid solidification experiments have been carried out with Cu-20%Co alloy under the high-pressure gas atomization conditions. Powders containing fine dispersions of Co-rich particles were obtained. The average radius of the Co-rich particles increases with the size of powders. The Co-rich droplets are repulsed by the solid/liquid interface during solidification and Co-rich particles distribute, therefore, mainly along the grain boundaries. Because the surface energy of the Co-rich liquid is relatively higher, the Co-rich droplets nucleate inside the atomized drop. After nucleation the Co-rich droplets move towards the center of the atomized drop under the effect of the temperature gradient. The droplets motion causes the formation of the Co-poor layer on the surface of the powder. |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000245999200010 |
| 出版者 | SCIENCE CHINA PRESS |
| 源URL | [http://ir.imr.ac.cn/handle/321006/89183] ![]() |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Zhao Jiuzhou |
| 作者单位 | Chinese Acad Sci, Met Res Inst, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhao Jiuzhou,Li Haili,Gao Lingling,et al. Solidification microstructure of the gasatomized drop of Cu-20%Co alloy[J]. ACTA METALLURGICA SINICA,2007,43(4):385-387. |
| APA | Zhao Jiuzhou,Li Haili,Gao Lingling,&He Jie.(2007).Solidification microstructure of the gasatomized drop of Cu-20%Co alloy.ACTA METALLURGICA SINICA,43(4),385-387. |
| MLA | Zhao Jiuzhou,et al."Solidification microstructure of the gasatomized drop of Cu-20%Co alloy".ACTA METALLURGICA SINICA 43.4(2007):385-387. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。

