中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Microstructures and hydrogen permeation characteristics of Nb-Ti-Ni alloys

文献类型:期刊论文

作者Xiong Liangyin; Liu Shi; Wang Longbao; Rong Lijian
刊名ACTA METALLURGICA SINICA
出版日期2008-07-01
卷号44期号:7页码:781-785
关键词Nb-Ti-Ni alloy hydrogen permeability hydrogen embrittlement
ISSN号0412-1961
通讯作者Liu Shi(sliu@imr.ac.cn)
英文摘要Microstructures and hydrogen permeation properties of Nb50Ti25Ni25 and Nb40Ti30Ni30 alloys were investigated, and compared with those of Nb, Pd and Pd-Ag alloy. The results indicate that the microstructures of the two alloys consist of the primary bcc-Nb(Ti,Ni) solid solution and the eutectic of bcc-Nb(Ti,Ni)+B2-TiNi, and the volume fraction of the eutectic phase increases with additions of Ni and Ti. The hydrogen permeabilities of the two alloys at 673 K are 1.71x10(-8) and 1.03x10(-8) mol(.)m(-1.)s(-1.)Pa(-0.5), respectively, which are in the same magnitude level as that of pure Pd, but a little lower than that of Pd-Ag alloy. Increasing of eutectic phase favors resistance to hydrogen embrittlement, while the hydrogen permeability of the alloys increases evidently with increasing the primary phase. Alloys with high hydrogen permeability and good resistance to hydrogen embrittlement can be designed by optimization of Ni and Ti contents.
WOS研究方向Metallurgy & Metallurgical Engineering
语种英语
WOS记录号WOS:000258314600003
出版者SCIENCE CHINA PRESS
源URL[http://ir.imr.ac.cn/handle/321006/95209]  
专题金属研究所_中国科学院金属研究所
通讯作者Liu Shi
作者单位Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
推荐引用方式
GB/T 7714
Xiong Liangyin,Liu Shi,Wang Longbao,et al. Microstructures and hydrogen permeation characteristics of Nb-Ti-Ni alloys[J]. ACTA METALLURGICA SINICA,2008,44(7):781-785.
APA Xiong Liangyin,Liu Shi,Wang Longbao,&Rong Lijian.(2008).Microstructures and hydrogen permeation characteristics of Nb-Ti-Ni alloys.ACTA METALLURGICA SINICA,44(7),781-785.
MLA Xiong Liangyin,et al."Microstructures and hydrogen permeation characteristics of Nb-Ti-Ni alloys".ACTA METALLURGICA SINICA 44.7(2008):781-785.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。