中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Preparation of TiAl3-Al composite coating by cold spraying

文献类型:期刊论文

作者Shen Li; Kong Ling-yan; Xiong Tian-ying; Du Hao; Li Tie-fan
刊名TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
出版日期2009-08-01
卷号19期号:4页码:879-882
关键词cold spraying TiAl3-Al composite coating orthorhombic Ti2AlNb alloy high temperature oxidation
ISSN号1003-6326
DOI10.1016/S1003-6326(08)60369-6
通讯作者Xiong Tian-ying(tyxiong@imr.ac.cn)
英文摘要TiAl3-Al coating was deposited on orthorhombic Ti2AlNb alloy substrate by cold spraying with the mixture of pure Al and Ti as the feedstock powder at a fixed molar ratio of 3:1 when the spraying distance, gas temperature and gas pressure for the process were 10 mm, 250 degrees C and 1.8 MPa, respectively. The as-sprayed coating was then subjected to heat treatment at 630 degrees C in argon atmosphere for 5 h at a heating rate of 3 degrees C/min and an argon gas flow rate of 40 mL/min. The obtained TiAl3-Al composite coating is about 212 mu m with a density of 3.16 g/cm(3) and a porosity of 14.69% in general. The microhardness and bonding strength for the composite coating are HV525 and 27.12 MPa.
WOS研究方向Metallurgy & Metallurgical Engineering
语种英语
WOS记录号WOS:000269099300020
出版者ELSEVIER SCIENCE BV
源URL[http://ir.imr.ac.cn/handle/321006/97587]  
专题金属研究所_中国科学院金属研究所
通讯作者Xiong Tian-ying
作者单位Chinese Acad Sci, State Key Lab Corros & Protect, Inst Met Res, Shenyang 110016, Peoples R China
推荐引用方式
GB/T 7714
Shen Li,Kong Ling-yan,Xiong Tian-ying,et al. Preparation of TiAl3-Al composite coating by cold spraying[J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA,2009,19(4):879-882.
APA Shen Li,Kong Ling-yan,Xiong Tian-ying,Du Hao,&Li Tie-fan.(2009).Preparation of TiAl3-Al composite coating by cold spraying.TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA,19(4),879-882.
MLA Shen Li,et al."Preparation of TiAl3-Al composite coating by cold spraying".TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA 19.4(2009):879-882.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。