PREPARATION OF (Ti, Al)N/Ti2AlN COATINGS
文献类型：期刊论文
| 作者 | Dong Yuliang; Yan Xubo; Zhao Shengsheng; Gong Jun; Sun Chao |
| 刊名 | ACTA METALLURGICA SINICA
 |
| 出版日期 | 2010-06-11 |
| 卷号 | 46期号:6页码:743-747 |
| 关键词 | arc ion plating Ti2AlN coating high temperature annealing friction coefficient |
| ISSN号 | 0412-1961 |
| DOI | 10.3724/SP.J.1037.2009.00754 |
| 通讯作者 | Sun Chao(csun@imr.ac.cn) |
| 英文摘要 | Ti-Al-N coatings with different Ti, Al and N contents were deposited on 1Cr18Ni9Ti stainless steel substrate by vacuum cathode arc ion plating (AIP) method and the as-deposited coatings were annealed under different conditions. The compositions and phases in the as-deposited coatings were also analyzed and compared. The XRD results showed that the composition of the coatings could be controlled by changing the deposition parameters and distinct Ti2AlN phase existed in the annealed coatings. The Ti2AlN phase could not appear unless the annealing temperature reached 650 degrees C. The reactions during the annealing process can be described as AlTi3N+5Al -> TiN+2Al(3)Ti and AlTi3N+3Al -> Ti2AlN+Al3Ti. The content of Ti2AlN phase increased slightly by extending the annealing time. The surface morphology and composition of the annealed coating were analyzed by SEM and the friction coefficient of the coating was measured. |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000280030800015 |
| 出版者 | SCIENCE PRESS |
| 源URL | [http://ir.imr.ac.cn/handle/321006/101164]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Sun Chao |
| 作者单位 | Chinese Acad Sci, State Key Lab Corros & Protect, Inst Met Res, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Dong Yuliang,Yan Xubo,Zhao Shengsheng,et al. PREPARATION OF (Ti, Al)N/Ti2AlN COATINGS[J]. ACTA METALLURGICA SINICA,2010,46(6):743-747. |
| APA | Dong Yuliang,Yan Xubo,Zhao Shengsheng,Gong Jun,&Sun Chao.(2010).PREPARATION OF (Ti, Al)N/Ti2AlN COATINGS.ACTA METALLURGICA SINICA,46(6),743-747. |
| MLA | Dong Yuliang,et al."PREPARATION OF (Ti, Al)N/Ti2AlN COATINGS".ACTA METALLURGICA SINICA 46.6(2010):743-747. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。