EFFECT OF Ti AND Nb MICRO-ALLOYING ON THE MICROSTRUCTURE OF THE ULTRA-PURIFIED 11%Cr FERRITE STAINLESS STEELS
文献类型：期刊论文
| 作者 | Liu Jing; Luo Xinghong; Hu Xiaoqiang; Liu Shi |
| 刊名 | ACTA METALLURGICA SINICA
 |
| 出版日期 | 2011-06-11 |
| 卷号 | 47期号:6页码:688-696 |
| 关键词 | ultra-purified ferrite stainless steel micro-alloying as-cast structure equiaxed interstitial element Ti and Nb stabilization |
| ISSN号 | 0412-1961 |
| DOI | 10.3724/SP.J.1037.2011.00059 |
| 通讯作者 | Luo Xinghong(xhluo@imr.ac.cn) |
| 英文摘要 | Ultra-purified ferrite stainless steels (UP-FSS) are widely used in the fields of automobile, household appliances etc. Much better performance than conventional ferrite stainless steels is obtained by minimizing the interstitial elements level in UP-FSS. However, some negative effects, such as degradation of the formability and ridging-resistance, are also brought by purifying the steels, which lead to abnormally growth of the columnar grains. Moreover, the grains in heat affected zone (HAZ) are apt to coarsen during welding process. One of the effective ways to resolve such problems is to increase the equiaxial grain ratio in as-cast microstructure and refine the grain size. Micro-alloying of steels with strong carbide and nitride former, such as Ti and Nb, is a way to do that. In this work, the effects of Ti and Nb micro-alloying on the as-cast, as-rolled, and HAZ microstructures of the ultra-purified 11%Cr ferrite stainless steels with different interstitial element levels were investigated by both experimental research and thermodynamic calculation. The results indicated that the effect of Ti and Nb micro-alloying was better when the content of C and N in the steel was 0.0163%, which showed the minimum grain size in as-cast, as-rolled, and HAZ microstructures, and the equiaxial grain ratio in as-cast microstructure was evidently improved as well. It was found by calculation that, with increasing of C and N content and addition of Ti and Nb to the steels, the solid-liquid two-phase region was broadened. This was beneficial to increase the undercooling in front of the liquid-solid interface and the probability of heterogeneous nucleation, and consequently, increase the equiaxial grain ratio and decrease the mean grain size in as-cast microstructure. On the other hand, with addition of Ti and increase of N content, TiN type particles might precipitate in solid-liquid two-phase region, which was helpful for promoting the heterogeneous nucleation of delta ferrite. |
| 资助项目 | National Natural Science Foundation of China[50734002] |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000292787700007 |
| 出版者 | SCIENCE PRESS |
| 资助机构 | National Natural Science Foundation of China |
| 源URL | [http://ir.imr.ac.cn/handle/321006/103995]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Luo Xinghong |
| 作者单位 | Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Liu Jing,Luo Xinghong,Hu Xiaoqiang,et al. EFFECT OF Ti AND Nb MICRO-ALLOYING ON THE MICROSTRUCTURE OF THE ULTRA-PURIFIED 11%Cr FERRITE STAINLESS STEELS[J]. ACTA METALLURGICA SINICA,2011,47(6):688-696. |
| APA | Liu Jing,Luo Xinghong,Hu Xiaoqiang,&Liu Shi.(2011).EFFECT OF Ti AND Nb MICRO-ALLOYING ON THE MICROSTRUCTURE OF THE ULTRA-PURIFIED 11%Cr FERRITE STAINLESS STEELS.ACTA METALLURGICA SINICA,47(6),688-696. |
| MLA | Liu Jing,et al."EFFECT OF Ti AND Nb MICRO-ALLOYING ON THE MICROSTRUCTURE OF THE ULTRA-PURIFIED 11%Cr FERRITE STAINLESS STEELS".ACTA METALLURGICA SINICA 47.6(2011):688-696. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。